A-Tech
A-Tech 16GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V for Micron MT36KSF2G72PZ server RAM
16GB DDR3L 1600 ECC registered DIMM, 2Rx4 CL11 1.35V for Micron MT36KSF2G72PZ servers
- Capacity16GB
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB capacity handles heavy server workloads
- DDR3L 1600 MHz speed accelerates data throughput
- ECC RDIMM design detects and corrects memory errors
- 35 V low voltage reduces power consumption
- 2Rx4 registered architecture supports dense multi-module configurations
Server Memory Upgrade
This 16 GB DDR3L module is built for servers and workstations that require registered ECC memory. It replaces Micron MT36KSF2G72PZ part numbers and operates at 1.35 V low voltage. The single DIMM adds capacity without occupying extra slots.
Sustained Load Stability
Registered buffering and ECC correction keep data integrity intact during continuous workloads. CL11 latency at 1600 MHz delivers consistent throughput for virtualisation and database tasks. The 2Rx4 organisation supports dense memory configurations on qualified platforms.
DDR3L 1.35 V Requirement
Your system must support DDR3L registered DIMMs at 1.35 V; standard 1.5 V DDR3 slots will not operate this module correctly. Verify the motherboard memory list before purchase.
Najważniejsze cechy
- 16 GB capacity handles heavy server workloads
- DDR3L 1600 MHz speed accelerates data throughput
- ECC RDIMM design detects and corrects memory errors
- 35 V low voltage reduces power consumption
- 2Rx4 registered architecture supports dense multi-module configurations
Specyfikacja
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MT36KSF2G72PZ-1G6N1KF, MT36KSF2G72PZ-1G6N1KG, MT36KSF2G72PZ-1G6P1 |
| Capacity | 16GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Micron Chipset |
| Features | MT36KSF2G72PZ-1G6N1KF, MT36KSF2G72PZ-1G6N1KG, MT36KSF2G72PZ-1G6P1 |
Pytania dotyczące tego produktu
How much power does the 1.35 V DDR3L 1600 module draw when the server runs continuously?
The module operates at 1.35 V, the standard DDR3 low-voltage level, so it draws less power than a 1.5 V DDR3 DIMM at the same 1600 MHz speed.
What motherboard slot and chipset support are required for this 240-pin registered ECC DIMM?
It needs a DDR3 RDIMM slot wired for registered ECC memory and a server chipset that accepts 2Rx4 16 GB modules at 1600 MHz.
Will this 2Rx4 DDR3L 1600 CL11 module share a channel with older DDR3 registered DIMMs?
Mixing ranks or speeds on the same channel is not recommended; the system will typically down-clock all DIMMs to the slowest module and may disable ECC if configurations differ.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



