Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green rectangular 288-pin DDR4 RDIMM module with black chips and silver edge connectors

A-Tech

A-Tech 16GB DDR4 2133MHz ECC Registered RDIMM 2Rx4 288-Pin Server Memory

SKU CH-JPKJ-7B0SW

16 GB DDR4 2133 MHz ECC registered RDIMM with dual-rank Micron chips and CL15 latency

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 capacity handles heavy server workloads
  • ECC registered design protects data integrity in critical applications
  • 2133 MHz CL15 speed delivers responsive memory performance
  • 2Rx4 dual-rank layout maximises density per 288-pin slot
  • Supermicro certified with Micron chips ensures validated compatibility

16GB DDR4 ECC RDIMM for servers

This 16GB DDR4 2133MHz module is built for servers and workstations that require error-correcting registered memory. It uses a 2Rx4 dual-rank layout with Micron chips and runs at the standard 1.20V. The 288-pin RDIMM form factor fits compatible enterprise platforms.

Upgrade from non-ECC or lower-capacity DIMMs

Replacing unbuffered or non-ECC memory with this registered ECC module adds data integrity protection for critical workloads. The jump is worth it when your motherboard and CPU support registered DIMMs and you need the 16GB density per slot. Systems limited to unbuffered memory cannot use this module.

Fits registered DDR4 channels.

This RDIMM installs directly into 288-pin DDR4 registered memory channels on qualified server boards. Each 16GB stick increases total capacity while leaving additional slots open for further expansion. Verify your platform’s qualified vendor list for the MEM-DR416L-CL01-ER21 part number before installation.

Najważniejsze cechy

  • 16 GB DDR4 capacity handles heavy server workloads
  • ECC registered design protects data integrity in critical applications
  • 2133 MHz CL15 speed delivers responsive memory performance
  • 2Rx4 dual-rank layout maximises density per 288-pin slot
  • Supermicro certified with Micron chips ensures validated compatibility

Specyfikacja

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL01-ER21
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL01-ER21 (MTA36ASF2G72PZ-2G1A2)

Pytania dotyczące tego produktu

Does the 288-pin RDIMM fit a standard DDR4 server DIMM slot?

Yes, the 288-pin RDIMM form factor matches the DDR4 registered DIMM slots used in compatible Supermicro and other server platforms.

What BIOS setting or slot order is required when installing this 2Rx4 registered module?

Install modules in the sequence recommended by the motherboard manual; registered DIMMs must populate the correct channels first and the BIOS must be set to run at 1.2 V for DDR4 2133 operation.

When should the 16 GB Micron chipset module be replaced or tested?

Run a memory diagnostic if the system shows corrected ECC errors, unexpected reboots, or fails to recognise the full 16 GB capacity during POST.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.