Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2933 ECC RDIMM 2Rx8 288-Pin Server RAM

SKU CH-11K7-RWPGN

16 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.2 V operation for servers and workstations

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB

  • ECC protection guards data integrity in critical workloads
  • 2933 MHz DDR4 speed accelerates server responsiveness
  • Registered design stabilises signal for high-density configurations
  • Dual-rank 2Rx8 organisation increases memory bandwidth
  • 20 V operation meets standard DDR4 voltage requirements

Server DDR4 ECC RDIMM

This 16 GB registered DIMM adds error-correcting memory to compatible DDR4 servers and workstations. It targets administrators who need data integrity for virtualisation, databases or compute clusters. The module is not suitable for desktop or laptop platforms that accept only unbuffered memory.

Registered 288-pin integration

The stick plugs into a 288-pin DDR4 RDIMM slot and requires a platform that supports registered, dual-rank modules. The register buffers address and control signals, reducing electrical load on the memory controller and allowing higher total system capacities. No extra cooling or power connectors are needed beyond the slot itself.

16 GB headroom at 2933 MHz

Running at 2933 MHz with CL21 latency and 1.2 V, the module handles typical multi-threaded workloads and moderate virtual machine densities. Capacity limits appear when applications demand more than 16 GB per channel or when the platform's maximum supported memory per socket is reached.

Najważniejsze cechy

  • ECC protection guards data integrity in critical workloads
  • 2933 MHz DDR4 speed accelerates server responsiveness
  • Registered design stabilises signal for high-density configurations
  • Dual-rank 2Rx8 organisation increases memory bandwidth
  • 20 V operation meets standard DDR4 voltage requirements

Specyfikacja

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 2Rx8 PC4-2933Y-R
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

At what CAS latency does the CL21 timing become the limiting factor under sustained load?

The module operates at CL21 CAS latency; sustained throughput will be bound by this timing figure combined with the 2933 MT/s data rate.

What are the thermal and acoustic characteristics when the DIMM runs continuously at 1.2 V?

The registered ECC DIMM runs at the standard 1.2 V DDR4 voltage and has no active cooling; it relies on system airflow, so heat output and noise depend entirely on the server chassis design.

Which existing hardware must the system provide for this registered ECC module to function?

The motherboard must support DDR4 registered ECC RDIMMs in a 288-pin slot and accept dual-rank x8 modules at 2933 MT/s.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.