BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277192BTC
Dostępny
A-Tech
A-Tech 4GB DDR3 1600MHz CL11 1.5V 204-Pin SODIMM for Kingston KHX1600C9S3P1K2/8G Laptop RAM
4 GB DDR3 1600 MHz laptop SODIMM with CL11 latency and 1.5 V operation for Kingston KHX1600C9S3P1K2/8G replacement
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Boosts laptop responsiveness with a 4GB DDR3 1600MHz module
- Runs at standard 1.5V DDR3 voltage for broad compatibility
- Fits 204-pin SO-DIMM slots in notebooks and all-in-ones
- Tested for reliable performance with major-brand memory chips
- Compatible replacement for Kingston KHX1600C9S3P1K2/8G memory kits
Upgrade path for DDR3 laptops
This 4 GB SO-DIMM module uses DDR3 1600 MHz memory rated at PC3-12800 with CL11 latency. It fits 204-pin slots in notebooks and all-in-one systems requiring a non-ECC, unbuffered stick. The part is built with major-brand chips and validated as a compatible equivalent for the Kingston KHX1600C9S3P1K2/8G reference.
Standard voltage keeps thermals predictable
Operating at 1.50 V, the module runs at the standard DDR3 voltage so it draws the same power as the original factory memory. No extra cooling or voltage tuning is required and the stick adds no measurable noise because it has no moving parts. Systems that already support DDR3 1600 will accept it without BIOS changes.
Tested modules and lifetime support
Every unit undergoes quality-assurance testing before shipping to confirm reliable operation at the rated speed and timings. A-Tech backs the memory with a lifetime warranty and provides US-based technical support for installation questions or troubleshooting. Buyers who need ECC error correction, registered buffering, or capacities above 4 GB per slot should look elsewhere.
Najważniejsze cechy
- Boosts laptop responsiveness with a 4GB DDR3 1600MHz module
- Runs at standard 1.5V DDR3 voltage for broad compatibility
- Fits 204-pin SO-DIMM slots in notebooks and all-in-ones
- Tested for reliable performance with major-brand memory chips
- Compatible replacement for Kingston KHX1600C9S3P1K2/8G memory kits
Specyfikacja
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Pytania dotyczące tego produktu
How do I install this 204-Pin DDR3 SODIMM and what step do people often miss?
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, insert at an angle then press down until the side clips click; the step often missed is fully seating both clips so the module locks flat.
What maintenance or replacement will this 4GB DDR3 1600MHz module need later?
No scheduled maintenance is required; keep the slot contacts clean and ensure the laptop's cooling vents stay clear so the 1.5V module runs within its thermal limits.
What limit appears first when this CL11 DDR3 1600 memory runs under sustained load?
The CAS latency of 11 cycles at 1600MHz sets the access timing floor; under continuous heavy workloads the memory controller hits that latency bound before bandwidth saturates.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279771BTC
Dostępny
