Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green rectangular DDR4 DIMM with black memory chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2133MHz ECC RDIMM 1Rx4 Server Memory

SKU CH-S5PP-TBBBC

An 8 GB DDR4 2133 MHz ECC registered DIMM with CL15 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed delivers responsive server performance
  • 20V operation reduces power draw in dense configurations
  • 1Rx4 single-rank layout supports higher memory density per channel
  • 288-pin DIMM fits standard DDR4 server slots

8GB DDR4 ECC RDIMM for servers

This 8GB DDR4 ECC RDIMM module runs at 2133MHz with CL15 latency and 1.20V voltage. It uses a 1Rx4 rank configuration on Micron chipset and is built as a compatible replacement for specific Micron part numbers. The registered design targets server and workstation platforms that require error-correcting memory.

DDR4 2133 registered DIMM limits

The module operates at the DDR4 2133 standard (PC4-17000) with a fixed 1.20V supply and CL15 timing. Registered signalling adds one clock cycle of latency compared with unbuffered DIMMs, and the 1Rx4 organisation limits maximum density per channel on some platforms. Systems must support ECC RDIMM at this speed; they will not accept unbuffered or non-ECC modules in the same slots.

Check motherboard qualified-vendor list

Verify that your server or workstation motherboard lists the Micron part numbers shown in the specifications as supported memory. Confirm the platform accepts 288-pin DDR4 RDIMMs at 2133MHz with 1.20V operation and 1Rx4 rank layout. Populate slots according to the vendor's population rules for registered DIMMs to ensure the system posts correctly.

Najważniejsze cechy

  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed delivers responsive server performance
  • 20V operation reduces power draw in dense configurations
  • 1Rx4 single-rank layout supports higher memory density per channel
  • 288-pin DIMM fits standard DDR4 server slots

Specyfikacja

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF1G72PZ-2G1A1, MTA18ASF1G72PZ-2G1A2IG, MTA18ASF1G72PZ-2G1A2IK, MTA18ADF1G72PZ-2G1A1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMTA18ASF1G72PZ-2G1A1, MTA18ASF1G72PZ-2G1A2IG, MTA18ASF1G72PZ-2G1A2IK, MTA18ADF1G72PZ-2G1A1

Pytania dotyczące tego produktu

Should I pick the 1Rx4 registered ECC module or look for a different rank for my server?

This module is a single 8 GB stick built as 1Rx4 registered ECC; choose it when your platform requires registered DIMMs with that rank configuration.

What does the 2133 MHz rating deliver once the DIMM is installed?

It runs at DDR4 2133 MHz with CL15 latency at 1.20 V, giving a PC4-17000 data rate for compatible server and workstation boards.

Does the 288-pin DDR4 interface limit the speed to 2133 MHz in practice?

The 288-pin DDR4 form factor supports higher speeds, but this module is specified at 2133 MHz and will operate at that frequency in a compatible system.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.