Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green 260-pin DDR4 SODIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400 ECC SODIMM CL17 1.2V for Samsung M474A1G43DB1-CRC M474A1G43EB1-CRC

SKU CH-QBN0-AJDQR

8GB DDR4 2400MHz ECC SODIMM module with CL17 latency and 1.2V operation for compatible Samsung server and workstation laptops

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • ECC protection guards data integrity in servers
  • 2400 MHz DDR4 speed handles heavy workloads
  • 20 V operation keeps power draw low
  • 260-pin SODIMM fits compatible laptop slots
  • Replaces Samsung M474A1G43DB1-CRC and M474A1G43EB1-CRC modules

8GB DDR4 2400 ECC SODIMM

This 8GB DDR4 2400 ECC SODIMM module delivers error-correcting memory for compatible laptop or compact server platforms. It operates at 2400MHz with CL17 latency and standard 1.20V power. The unbuffered design suits systems that require ECC without registered signalling. Builders upgrading a Samsung M474A1G43DB1-CRC or M474A1G43EB1-CRC module can use this as a direct replacement.

260-pin SO-DIMM fits DDR4 slots

The 260-pin SO-DIMM form factor installs in any DDR4 SO-DIMM slot wired for unbuffered ECC memory. No extra power cables or cooling brackets are required. The single 8GB rank leaves additional slots free for further capacity expansion if the platform supports it. Verify the system documentation for maximum supported memory and ECC enablement before installation.

Sustained workloads benefit from ECC

Error correction detects and corrects single-bit errors during continuous operation, reducing silent data corruption in long-running tasks. The module maintains its 2400MHz CL17 timing under sustained load at the rated 1.20V. Systems without ECC support in the memory controller will not activate the protection, so confirm platform compatibility to gain the reliability advantage.

Najważniejsze cechy

  • ECC protection guards data integrity in servers
  • 2400 MHz DDR4 speed handles heavy workloads
  • 20 V operation keeps power draw low
  • 260-pin SODIMM fits compatible laptop slots
  • Replaces Samsung M474A1G43DB1-CRC and M474A1G43EB1-CRC modules

Specyfikacja

BrandA-Tech
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Pytania dotyczące tego produktu

Will the CL17 latency throttle throughput during sustained server workloads?

The module runs at DDR4 2400 with CL17 timings; latency stays fixed at that rating and does not increase under continuous load.

Does the 1.20 V ECC SODIMM run hot or draw extra power in a 24/7 workstation?

Standard DDR4 1.20 V operation keeps power draw and heat at typical SODIMM levels even during all-day ECC workloads.

My laptop only takes non-ECC memory — will this 260-pin ECC module still work?

This is an ECC unbuffered SODIMM; it requires a platform that explicitly supports ECC SO-DIMMs, so a non-ECC-only laptop will not accept it.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.