Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Full-tower black case with aluminium X frame and dual tempered glass sides

ASUS

ASUS ROG GR701 full-tower PC case, Black

SKU CH-CH13-4KQ3Y

Full-tower case for EATX, ATX, Micro-ATX and Mini-ITX boards with dual tempered-glass panels, four pre-installed 140 mm PWM fans, nine expansion slots plus three vertical.

  • Fits EATX boards up to 12 x 10.9 inches
  • Seven 2.5-inch and two combo 2.5/3.5 drive bays
  • Nine standard plus three vertical expansion slots
  • Front panel with two USB 3.2 Gen 2x2 Type-C and four USB 3.2 Gen 1 ports
  • Supports radiators up to 420 mm front and top with four 140 mm fans pre-installed

Aluminium X-frame full-tower chassis

The ASUS ROG GR701 is a full-tower computer case built around an aluminium alloy X-shaped frame. It supports EATX motherboards up to 12 by 10.9 inches as well as ATX, Micro-ATX and Mini-ITX form factors. Dual tempered-glass panels on the left and right sides expose the interior. The enclosure targets builders who want a showcase chassis with extensive radiator support.

EATX motherboard clearance

The defining specification is the 12 by 10.9 inch EATX tray clearance that determines whether a given extended-ATX board will fit. Nine standard horizontal expansion slots are provided alongside three additional vertical slots for alternative GPU mounting. Storage capacity includes five dedicated 2.5 inch bays and two combo bays accepting either 2.5 or 3.5 inch drives. Front I/O supplies a headphone/microphone jack, four USB 3.2 Gen 1 ports and one USB 3.2 Gen 2 Type-C port plus a lighting control button.

Sustained thermal headroom

Four 140 mm PWM fans come pre-installed, three at the front and one at the rear, establishing a baseline airflow for long-duration workloads. The front and top each accept radiators up to 420 mm while the rear takes 140 mm units, allowing large liquid-cooling loops to dissipate heat continuously. Maximum CPU cooler height is 190 mm, limiting the tallest tower coolers but still accommodating most mainstream designs. Builders needing more than seven drive bays or a taller air cooler should look elsewhere.

Najważniejsze cechy

  • Fits EATX boards up to 12 x 10.9 inches
  • Seven 2.5-inch and two combo 2.5/3.5 drive bays
  • Nine standard plus three vertical expansion slots
  • Front panel with two USB 3.2 Gen 2x2 Type-C and four USB 3.2 Gen 1 ports
  • Supports radiators up to 420 mm front and top with four 140 mm fans pre-installed

Specyfikacja

BrandASUS

Pytania dotyczące tego produktu

How does the 190 mm CPU cooler clearance work once the side tempered glass panel is fitted?

The 190 mm limit is measured with both glass panels in place so any tower cooler up to that height will clear the right-hand glass without modification.

What does the front USB 3.2 Gen 2x2 Type-C port actually cap at in real use?

It runs at the full 20 Gbit/s Gen 2x2 rate provided the motherboard header is USB 4.0 or USB 3.2 Gen 2x2; otherwise it falls back to the header's maximum speed.

What mounting hardware is needed to install a 420 mm radiator in the front?

The front chamber accepts a 420 mm radiator directly on the pre-installed 140 mm fan mounts; no extra brackets are required beyond the radiator's own screws.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.