Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Clear PETG rigid tube 16mm OD 12mm ID 500mm length

Barrow Mods

Barrow Mods PETG Rigid HardTube 16/12mm 500mm Clear

SKU CH-BBA1-KEBC7

Clear PETG rigid tube with 16 mm outer and 12 mm inner diameter, 500 mm long, for custom hard-line liquid cooling loops

  • ColorClear
  • FeaturesBarrow's Rigid tubing is a great alternative to classic soft
  • Cleaner, precise routing with rigid PETG hardline tubing
  • Alternative to soft tubing for custom liquid cooling builds
  • Bendable with heat gun, bending cord and tool for custom shapes
  • 16 mm outer and 12 mm inner diameter for 16 mm hardline fittings
  • 500 mm length per tube for flexible loop planning

Rigid PETG HardTube 16/12mm

This clear PETG tube is a rigid alternative to flexible soft tubing for custom liquid-cooling loops. Its 16 mm outer and 12 mm inner diameters suit builders who want precise, straight runs and a clean aesthetic. It is sold new in a 500 mm length for cutting to exact fit.

Thermals noise and power

The tube itself generates no heat, noise or electrical draw because it is a passive conduit. Thermal performance depends entirely on the coolant, radiator and pump you pair with it. Proper bending and fitting eliminate flow restriction that could raise loop temperatures.

Bundled accessories and software

The package contains one 500 mm clear tube only; no bending cord, heat gun, bending tool or specialised 16 mm hardline fittings are included. You must source those separately to shape the tube and secure leak-free connections. Using standard compression or barb fittings will cause cracking and leaks.

Najważniejsze cechy

  • Cleaner, precise routing with rigid PETG hardline tubing
  • Alternative to soft tubing for custom liquid cooling builds
  • Bendable with heat gun, bending cord and tool for custom shapes
  • 16 mm outer and 12 mm inner diameter for 16 mm hardline fittings
  • 500 mm length per tube for flexible loop planning

Specyfikacja

BrandBarrow
ModelPG1612-L-CLEAR
ColorClear
FeaturesBarrow's Rigid tubing is a great alternative to classic soft tubing. Made of a PETG, hardline tubing is a cleaner, more precise way of tubing your system.

Pytania dotyczące tego produktu

How do I install the 16mm PETG hard tube and what is the common mistake?

Cut the 500mm tube to length, chamfer the ends, then heat evenly with a heat gun while inserting a bending cord to form bends; the frequent error is using standard compression or barb fittings instead of dedicated 16mm hardline fittings, which causes cracking and leaks.

What maintenance or replacement will the PETG tube need later?

Inspect the clear 16/12mm tube periodically for clouding, plasticiser buildup or micro-cracks near bends; replace the 500mm section if discolouration appears or if a fitting is re-seated and the tube end shows stress whitening.

What limit appears first during sustained use of the hard tube?

The PETG material softens above its glass-transition temperature, so continuous coolant temperatures approaching that point will cause the 16mm tube to lose rigidity and deform before any fitting failure occurs.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.