Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two vented metal cantilever shelves, 1U high, 10 inch depth, silver finish

BFKK

BFKK 1U Vented Cantilever Rack Shelf 10" (254mm) Depth 2-Pack

SKU CH-B9WJ-BK4XF

A 1U vented cantilever rack shelf, 10" (254mm) deep, rated for 44 pounds with 1.5mm thick sides, supplied as a 2-pack with 19-inch mounting hardware

  • TypeRack Shelf
  • Holds IT and network gear in any 19-inch rack or cabinet
  • Disassembled design lets you assemble the shelf and flip the lip for different mounting needs
  • 5 mm thick side rails support up to 44 pounds of equipment
  • Flat-pack construction reduces risk of ear damage during transit
  • Two shelves included, each with 1U height, 254 mm depth and full mounting hardware

Two-pack cantilever shelf for 19-inch racks

This two-pack of 1U vented cantilever shelves fits standard 19-inch racks and cabinets. Each shelf is 10 inches (254 mm) deep and built from 1.5 mm thick steel rated for 44 pounds. The set includes M6 screws with cage nuts and M5 screws with nuts for mounting.

Disassembled design replaces fixed trays

The shelves ship disassembled so you can orient the lip up or down to suit different equipment. This flexibility replaces fixed trays that cannot be reconfigured. The jump is worth it when you need to secure shallow devices or route cables through the vented surface.

Simple assembly with included hardware

Each unit assembles in minutes using the supplied fasteners; no special tools are required. The flat-packed format protects the mounting ears during transit. The only common issue is forgetting to choose the lip orientation before tightening the bolts.

Najważniejsze cechy

  • Holds IT and network gear in any 19-inch rack or cabinet
  • Disassembled design lets you assemble the shelf and flip the lip for different mounting needs
  • 5 mm thick side rails support up to 44 pounds of equipment
  • Flat-pack construction reduces risk of ear damage during transit
  • Two shelves included, each with 1U height, 254 mm depth and full mounting hardware

Specyfikacja

TypeRack Shelf

Pytania dotyczące tego produktu

Will the 19-inch rack ears on this 1U shelf accept M6 cage nuts for mounting?

Yes, each shelf includes four M6 screws and cage nuts designed for standard 19-inch rack posts.

Which way should the lip face when I bolt the disassembled shelf together?

The lip can be oriented up or down; choose the direction that best supports your equipment before tightening the side brackets.

How often should I check the 1.5 mm side brackets and M5 hardware for loosening?

Inspect the brackets and M5 screws after the first week of use and then every six months to maintain the 44-pound load rating.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.