Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small square 60mm black case fan with transparent blades, 25mm thick, three-pin connector visible

BGears

BGears b-Blaster 60 60mm 5500 RPM 40 CFM 3-pin case fan

SKU CH-2KGV-HWX6Z MPN b-Blaster 60

A 60 mm case fan with dual ball bearings spinning at 5500 RPM to deliver 40 CFM airflow at 39 dBA via a 3-pin connector

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size60mm
  • Fan Thickness25mm
  • Bearing Type2 Ball
  • Dual ball bearing extends operational life
  • 5500 RPM delivers 40 CFM airflow
  • 60 mm frame fits tight chassis spaces
  • 3-pin connector reports speed to motherboard
  • Four mounting screws included for installation

Compact 60 mm Case Fan

The BGears b-Blaster 60 is a single 60 mm case fan built for tight mounting points in PC cases, power supplies or CPU heatsinks. It uses a 2 ball bearing for extended life and high-speed operation. A 3-pin connector provides a fan-speed signal output, and four mounting screws are included.

Thermals, Noise and Power

At 5500 RPM the fan moves 40 CFM of air while producing 39 dBA of noise. The 12 VDC motor draws power through the 3-pin header without a separate controller. The 25 mm thickness fits standard 60 mm mounting holes.

Speed-Driven Airflow Decision

The 5500 RPM rating is the specification that determines whether this fan suits your build; it delivers high airflow for its size but at a noise level that may be audible in quiet environments. Buyers who need lower noise or higher static pressure should look elsewhere.

Najważniejsze cechy

  • Dual ball bearing extends operational life
  • 5500 RPM delivers 40 CFM airflow
  • 60 mm frame fits tight chassis spaces
  • 3-pin connector reports speed to motherboard
  • Four mounting screws included for installation

Specyfikacja

BrandBgears
Modelb-Blaster 60
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
Fan Size60mm
Fan Thickness25mm
Bearing Type2 Ball
RPM5500 RPM
Air Flow40 CFM
Noise Level39 dBA
Power Connector3 Pin
Dimensions60.00 x 60.00 x 25.00 mm
Waga przesyłki0.06 kg
Wymiary opakowania166 × 109 × 30 mm

Pytania dotyczące tego produktu

How do I mount the 60mm fan and which step is often missed?

Align the four screw holes on the 60 x 60 x 25 mm frame with the case or heatsink mounts, insert the four included screws, and tighten them evenly; the step most people skip is checking that the 3-pin connector reaches the motherboard header before securing the fan.

What maintenance will the 2 ball bearing need over time?

The dual ball bearing is sealed and requires no lubrication; after several years of continuous 5500 RPM operation the bearing may develop audible rumble, at which point the fan should be replaced rather than serviced.

At what point does the 39 dBA noise become the limiting factor during sustained use?

At the fixed 5500 RPM speed the fan constantly produces 39 dBA and delivers 40 CFM; in quiet builds this acoustic level is usually the first constraint noticed during long sessions, before airflow or thermal limits are reached.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.