Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with five blue USB ports, a white 20-pin header and a black 15-pin power connector

BONAEVER

BONAEVER PCI-E to USB 3.0 5-Port Expansion Card 15-Pin Power Connector

SKU CH-K0FV-67788

Adds five USB 3.0 ports and a 20-pin internal header for two more, with a SATA 15-pin power connector

  • Case TypeProtection Case
  • Add up to seven USB 3.0 devices with five external ports and one internal 20-pin connector
  • Transfer data at up to 5 Gbps with USB 3.0 superspeed, actual rate depends on connected device
  • Works with USB 2.0 and 1.1 devices for backward compatibility
  • Includes SATA 15-pin Y-cable and 4-pin to SATA adapter for flexible power options
  • Compatible with Windows XP through 10 and Linux for broad system support

PCI-E USB 3.0 5-Port Expansion Card

This PCI-E expansion card adds five external USB 3.0 ports and one internal 20-pin header for two additional ports. A 15-pin SATA power connector supplies the board, and a Y-cable plus a 4-pin adapter are included for older power supplies. The card fits a standard desktop PCI Express slot.

Builders adding front-panel or rear USB 3.0 ports

Suits system builders who need extra SuperSpeed USB 3.0 ports on a desktop motherboard with a free PCI-E slot. Not for laptops or small-form-factor systems without a full-size PCI Express slot. Not for users who only have USB 2.0 headers and no SATA or 4-pin power connectors available.

5 Gbps SuperSpeed USB 3.0 transfer rate

The controller supports up to 5 Gbps per port, with actual throughput limited by the connected device. Five Type-A ports and one 20-pin internal header serve up to seven USB 3.0 devices total. Backward compatible with USB 2.0 and 1.1 devices.

Najważniejsze cechy

  • Add up to seven USB 3.0 devices with five external ports and one internal 20-pin connector
  • Transfer data at up to 5 Gbps with USB 3.0 superspeed, actual rate depends on connected device
  • Works with USB 2.0 and 1.1 devices for backward compatibility
  • Includes SATA 15-pin Y-cable and 4-pin to SATA adapter for flexible power options
  • Compatible with Windows XP through 10 and Linux for broad system support

Specyfikacja

Case TypeProtection Case

Pytania dotyczące tego produktu

What cables and connectors come with the BONAEVER PCI-E to USB 3.0 5-Port card, and what must I supply myself?

The card includes a Y-cable converting one male 15-pin SATA connector to two female 15-pin SATA connectors and a 4-pin male to dual female 15-pin SATA power cable. You must provide a free PCI Express slot and a SATA or 4-pin power connector from your power supply.

Should I choose the internal 20-pin header or the five rear USB 3.0 ports for my front-panel upgrade?

Use the internal 20-pin header to add two front-panel USB 3.0 ports; the five rear ports are ready for external devices. Both operate at up to 5 Gbps and share the same controller, so pick based on where you need the ports.

What does the 5 Gbps USB 3.0 rating mean for real-world file transfers on this card?

The 5 Gbps figure is the interface maximum; actual throughput depends on the connected device, cable quality, and system load, so large-file copies will typically run below that ceiling.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.