Brute Networks
Brute Networks P19042-H21 HPE 16GB DDR4-2933 2Rx8 Registered ECC server RAM
HPE-compatible 16 GB DDR4-2933 registered ECC server memory, part P19042-H21, 2Rx8 organisation at 1.2 V
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR4-2933 capacity for high-density server workloads
- Registered ECC design protects data integrity in critical applications
- 2Rx8 organisation optimises bandwidth on dual-rank channels
- 20V operation reduces power draw per module
- 100% HPE compatible — validated with major-brand Samsung, SK Hynix or Micron chips
16GB DDR4-2933 Registered ECC Memory
This 16GB DDR4 module runs at 2933MHz with a 1.20V operating voltage. It uses a 288-pin form factor and features registered ECC architecture with a 2Rx8 rank configuration. The module is built with major brand chipsets from Samsung, SK Hynix, or Micron.
Suited for HPE servers needing P19042-H21 equivalent
Designed as a direct replacement for HPE part number P19042-H21, this memory maintains factory warranty compliance. It is not for systems that require unbuffered non-ECC modules or a different DDR generation. Buyers needing capacities other than 16GB should look at alternative modules.
Simple DIMM installation
Installation follows standard 288-pin DDR4 DIMM procedures for the target server platform. All modules are 100% tested and validated for compatibility, and orders are filled with identically matched sticks to prevent mismatch issues. No special configuration beyond normal server memory population rules is required.
Najważniejsze cechy
- 16GB DDR4-2933 capacity for high-density server workloads
- Registered ECC design protects data integrity in critical applications
- 2Rx8 organisation optimises bandwidth on dual-rank channels
- 20V operation reduces power draw per module
- 100% HPE compatible — validated with major-brand Samsung, SK Hynix or Micron chips
Specyfikacja
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Pytania dotyczące tego produktu
Will my server board accept a 288-pin DDR4 2933 MHz registered ECC module?
The module uses the standard 288-pin DDR4 form factor and runs at DDR4 2933 (PC4-23400) with 1.20 V registered ECC operation.
Can I add this 16 GB 2Rx8 stick to existing registered ECC DIMMs of a different capacity?
Yes — it is a standard registered ECC DDR4 2933 2Rx8 DIMM, so it can populate an empty slot alongside other registered ECC modules.
How do I confirm the module is running at 2933 MHz after installation?
Check the BIOS memory information or an OS tool such as dmidecode; both will report the configured speed as DDR4 2933 (PC4-23400).
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



