Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
White brass 90-degree rigid fitting for 14mm OD tubing

Bykski

Bykski 14mm OD 90° Rigid Fitting White

SKU CH-81C3-9HXNZ

Connects 14 mm rigid tubing with a 90-degree brass fitting for leak-free custom loops

  • TypeCPU Block
  • ColorWhite
  • Fits 14 mm OD rigid tubing for custom loops
  • Brass body with nickel plating resists corrosion
  • 90-degree angle enables tight, clean routing
  • Hand-tighten design installs without extra tools
  • Precision machining gives a watertight seal and smooth flow

Precision 90° Fitting for 14mm Tubing

This brass nickel-plated fitting creates a tight 90-degree turn in custom water-cooling loops that use 14mm outer-diameter rigid tubing. It is intended for DIY builders who want clean corner routing without flexible hose. The white finish matches colour-themed builds and the single-piece design keeps the loop simple. Buyers needing angled fittings for other tube sizes or rotary adjustability cannot use this part.

Hand-Tight Brass Construction

Installation requires only finger tightening; no spanners or specialised tools are needed because the threads are cut for hand assembly. The nickel plating resists corrosion from common coolants and the solid brass body resists deformation during tightening. Over-tightening by hand can still strip the fine threads or crack acrylic tubing, so stop when resistance increases sharply. Users who prefer tool-torqued compression fittings will find this method less controllable.

Sustained Flow Through Fixed Angle

The fixed 90-degree bend maintains a constant internal path so coolant velocity and pressure drop remain stable during continuous operation. Brass conducts heat away from the fluid slightly, but the effect is negligible in a loop with active radiators. Because the angle cannot be rotated after installation, loop order must be planned before final tightening. Builders who need variable routing or frequent reconfiguration should choose rotary fittings instead.

Najważniejsze cechy

  • Fits 14 mm OD rigid tubing for custom loops
  • Brass body with nickel plating resists corrosion
  • 90-degree angle enables tight, clean routing
  • Hand-tighten design installs without extra tools
  • Precision machining gives a watertight seal and smooth flow

Specyfikacja

TypeCPU Block
ColorWhite

Pytania dotyczące tego produktu

How can I verify the 90-degree brass fitting is sealed and flowing correctly after hand-tightening it onto 14mm OD rigid tubing?

Run the loop with the pump only, watch the joint for any moisture, and feel for steady coolant movement through the transparent tubing to confirm a leak-free seal and proper circulation.

What comes in the package and what additional parts are needed to complete a rigid-tube loop with this fitting?

The box contains one 14mm OD 90-degree brass fitting; you must purchase 14mm OD rigid tubing, matching compression rings or O-rings, coolant, a pump, reservoir, radiator and blocks separately.

Which version of this fitting should I select if my loop uses 14mm OD rigid tubing and I want a white finish?

Choose the white-coloured 14mm OD 90-degree brass fitting listed here; it is the only variant that matches both the tubing size and the white aesthetic.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.