Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz SO-DIMM MacBook Pro 17 2011

SKU CH-P151-YN7FC

16 GB DDR3 kit with two 8 GB 204-pin SO-DIMM modules at 1333 MHz for the 17-inch MacBook Pro (Late 2011)

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16GB kit expands a Late 2011 MacBook Pro 17 to its 16GB maximum
  • Two 8GB DDR3 1333MHz modules install in the two available SO-DIMM slots
  • 204-pin PC3-10600 CL9 unbuffered design matches the factory memory specification
  • 5V operation keeps power draw within the original notebook limits
  • Computer Memory Solutions tests every stick for guaranteed MacBook Pro 17 compatibility

Targeted MacBook Pro upgrade

This 16 GB kit contains two 8 GB DDR3 SO-DIMM modules rated at 1333 MHz with CL9 timing. It is built specifically for the 17-inch MacBook Pro from late 2011 (model MD311N/A) and brings that machine to its maximum supported memory capacity.

Two matched modules simplify installation

The paired sticks are tested together so the Mac recognises the full 16 GB immediately without manual configuration. Unbuffered, non-ECC operation at 1.5 V matches the original factory specification, and the 204-pin form factor fits the existing slots directly.

Fills both slots for 16 GB total

With two sockets available, this kit occupies both and reaches the platform ceiling of 16 GB. Users needing more memory than 16 GB or wanting ECC error correction will have to choose a different system, as this hardware cannot exceed that limit.

Najważniejsze cechy

  • 16GB kit expands a Late 2011 MacBook Pro 17 to its 16GB maximum
  • Two 8GB DDR3 1333MHz modules install in the two available SO-DIMM slots
  • 204-pin PC3-10600 CL9 unbuffered design matches the factory memory specification
  • 5V operation keeps power draw within the original notebook limits
  • Computer Memory Solutions tests every stick for guaranteed MacBook Pro 17 compatibility

Specyfikacja

BrandComputer Memory Solutions
ModelCM10246410600SODRH
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple« MacBook Pro 17-inch (Late 2011), MD311N/A
Package Content2 Memory RAM Sticks

Pytania dotyczące tego produktu

Will the 204-pin DDR3 SO-DIMM modules need any firmware updates or thermal-pad replacement later?

No firmware updates are required; the modules have no heat spreader and are unbuffered, so there are no thermal pads to replace during their service life.

What electrical limit appears first when both 8 GB sticks run at 1333 MHz continuously?

The 1.5 V supply rail and the CL9 9-9-9 timing budget set the voltage and latency ceiling that the memory controller reaches before any thermal throttle.

How much heat and fan noise should I expect from the kit inside a 17-inch MacBook Pro (Late 2011) under all-day load?

The two unbuffered 1.5 V modules add only modest heat; the notebook’s existing cooling curve handles the extra load without a noticeable fan-speed increase.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.