Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR3 DIMM sticks with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1600 CL11 1.5V 240-Pin memory upgrade

SKU CH-48CT-37RD6

16 GB DDR3 kit (2 × 8 GB) running at 1600 MHz CL11 for select ASRock motherboards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 16 GB kit (2 × 8 GB) expands system memory
  • DDR3-1600 CL11 timing delivers responsive performance
  • 5 V standard voltage works with stock BIOS settings
  • Unbuffered non-ECC DIMMs suit consumer desktop boards
  • Tested compatible with listed ASRock A75M and B75M models

16GB DDR3 kit for ASRock A75M-ITX and B75M boards

This 16GB kit contains two 8GB DDR3 modules rated at 1600 MHz with CL11 timing. It is built for ASRock motherboards including the A75M-ITX, B75M, B75M R2.0 and B75M-DGS where the maximum supported memory is 16GB across two sockets.

Installing the modules is straightforward on these

Align the notch on each 240-pin DIMM with the slot key and press firmly until the retention clips click. The kit runs at the standard 1.5V so no BIOS voltage adjustment is required, and the unbuffered non-ECC design matches the board specification. Using mixed speeds or exceeding the two-slot limit will prevent the system from posting.

Before ordering confirm your motherboard model

The supported boards are the ASRock A75M-ITX, B75M, B75M R2.0 and B75M-DGS with two DDR3 slots and a 16GB maximum capacity. Systems needing more than 16GB, ECC error correction, registered modules or a four-slot layout cannot use this kit.

Najważniejsze cechy

  • 16 GB kit (2 × 8 GB) expands system memory
  • DDR3-1600 CL11 timing delivers responsive performance
  • 5 V standard voltage works with stock BIOS settings
  • Unbuffered non-ECC DIMMs suit consumer desktop boards
  • Tested compatible with listed ASRock A75M and B75M models

Specyfikacja

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemAsrock Motherboard A75M-Itx B75M B75M R2.0, B75M-Dgs
Package Content2 Memory RAM Sticks

Pytania dotyczące tego produktu

How do I verify the kit is running at 1600 MHz CL11 after installation?

Open the BIOS or a tool like CPU-Z and confirm the memory frequency shows 1600 MHz with timings of 11-11-11 at 1.5 V.

What does the package contain and is anything else required?

The box includes two 8 GB 240-pin DDR3 DIMMs for a total of 16 GB; no extra parts or cables are needed.

Which capacity should I choose for an ASRock B75M-R2.0 that supports up to 16 GB across two sockets?

This 16 GB (2 x 8 GB) kit fills both slots and matches the board's maximum supported memory.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.