Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board memory module with black chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions 2GB DDR3 1066MHz SO-DIMM CM256648500SO B123

SKU CH-W8W5-3GBZ7

2GB DDR3 1066MHz SO-DIMM module rated CL7 at 1.5V for Intel D2500 and D2550 motherboards

  • Capacity2GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 2GB capacity for Intel D2500 series motherboards
  • DDR3 1066MHz speed matches PC3 8500 spec
  • CL7 timing with 1.5V voltage for stable operation
  • Single rank 204-pin SO-DIMM fits one slot
  • Unbuffered non-ECC design for desktop compatibility

Targeted DDR3 upgrade for Intel embedded boards

This 2GB DDR3 1066MHz SO-DIMM is built specifically for the Intel D2500Cc, D2500Hn, D2500Hnd and D2550Dc2 motherboards. It uses a 204-pin form factor and operates at 1.5V with CL7 timings. The single-rank, unbuffered design matches the memory architecture those platforms expect.

Steady operation at rated JEDEC speed

The module runs at DDR3 1066 (PC3 8500) with 7-7-7 latency and no heat spreader, relying on the board's airflow for cooling. Non-ECC chips mean error correction is handled by the platform if supported, otherwise data moves without parity overhead. Voltage stays at the standard 1.5V so power draw remains predictable during long workloads.

Direct slot installation with one limitation

Insert the stick into the single SO-DIMM socket until the retention clips click; no tools or configuration are required. The board only accepts one module and caps total memory at 2GB, so this kit fills the only slot available. Buyers who want more capacity cannot expand further on these motherboards.

Najważniejsze cechy

  • 2GB capacity for Intel D2500 series motherboards
  • DDR3 1066MHz speed matches PC3 8500 spec
  • CL7 timing with 1.5V voltage for stable operation
  • Single rank 204-pin SO-DIMM fits one slot
  • Unbuffered non-ECC design for desktop compatibility

Specyfikacja

BrandComputer Memory Solutions
ModelCM256648500SO
Capacity2GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemIntel D2500Cc, D2500Hn, D2500Hnd, D2550Dc2 Motherboard
Package Content1 Memory RAM Stick

Pytania dotyczące tego produktu

How much power does this 1.5V DDR3 1066MHz module draw during continuous operation?

It operates at the standard 1.5V DDR3 voltage. Actual power draw depends on the motherboard's memory controller and system workload.

What motherboard slot and chipset are required to install this 204-pin SO-DIMM?

It fits a 204-pin DDR3 SO-DIMM slot and is validated for Intel D2500Cc, D2500Hn, D2500Hnd and D2550Dc2 motherboards.

Can this CL7 1066MHz stick run alongside an existing module in a D2500 series board with one socket?

The compatible boards listed have a single memory socket, so only one module can be installed at a time.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.