Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green circuit boards with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333 SO-DIMM for iMac 21.5 Mid-2010

SKU CH-KQVT-RBAJK

A 4 GB DDR3 SO-DIMM kit with two 2 GB modules at 1333 MHz CL7 for the 21.5-inch 2010 iMac

  • Capacity4GB (2 x 2GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 4GB kit upgrades your iMac to 4GB total memory
  • 1333 MHz DDR3 speed matches the Mid-2010 iMac specification
  • CL7 latency and 1.5V voltage meet Apple's original requirements
  • 204-pin SO-DIMM form factor fits the 21.5-inch iMac slots exactly
  • Two 2GB modules populate two of the four available sockets

iMac Mid-2010 21.5-inch memory kit

This 4 GB kit contains two 2 GB DDR3 1333 SO-DIMM modules built for the Apple iMac "Core i3" 3.2 21.5-inch (Mid-2010) MC509LL/A. The unbuffered, non-ECC sticks run at 1.5 V with CL7 7-7-7 timing and use 204-pin connectors. Computer Memory Solutions backs the kit with a limited lifetime warranty when purchased directly from them.

Suitable for the specified 21.5-inch Mid-2010 iMac

Owners of that exact model can install both modules to reach 4 GB total capacity. Buyers with any other iMac size, year, or Mac model cannot use this kit. Systems that require ECC, registered, or lower-voltage DDR3 memory are also incompatible.

204-pin DDR3 1333 SO-DIMM form factor

The 204-pin SO-DIMM edge connector and DDR3 1333 (PC3-10600) signalling determine whether the modules physically fit and function in the target iMac. Verify the 204-pin DDR3 requirement before ordering.

Najważniejsze cechy

  • 4GB kit upgrades your iMac to 4GB total memory
  • 1333 MHz DDR3 speed matches the Mid-2010 iMac specification
  • CL7 latency and 1.5V voltage meet Apple's original requirements
  • 204-pin SO-DIMM form factor fits the 21.5-inch iMac slots exactly
  • Two 2GB modules populate two of the four available sockets

Specyfikacja

BrandComputer Memory Solutions
ModelCM2566410600SODRH
Capacity4GB (2 x 2GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Imac "Core I3" 3.2 21.5-Inch (Mid-2010) Mc509Ll/A
Package Content2 Memory RAM Sticks

Pytania dotyczące tego produktu

Will the 1333 MHz speed run at full rate in the Mid-2010 iMac?

The iMac's memory controller supports 1333 MHz DDR3, so both 2 GB modules will operate at their rated PC3-10600 speed without down-clocking.

Does the 204-pin SO-DIMM form factor match the iMac's slots?

Yes, the kit uses standard 204-pin DDR3 SO-DIMMs, which are the exact module type required by the four memory slots in the 21.5-inch Mid-2010 iMac.

How many sticks are included and will they fit the available slots?

The package contains two 2 GB sticks, leaving two of the four SO-DIMM slots free for future expansion up to the 16 GB maximum.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.