Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Full-tower E-ATX case in deep purple with dual tempered-glass panels and four 140 mm fans

Corn Electronics

Corn Electronics GR701 E-ATX PC case Saber/Fate Purple

SKU CH-PJYR-0FYEB

Full-tower E-ATX case with dual 420 mm radiator support, four pre-installed 140 mm PWM fans, metal GPU holder and front USB 4.0 Type-C

  • TypeATX Full Tower

Options Saber

Pokaż jeszcze 48 konfiguracji

Przekreślone wersje istnieją, ale nie są dostępne w tym miejscu.

  • Supports E-ATX boards up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top
  • Four 140 mm PWM fans pre-installed
  • Metal GPU holder and vertical slot kit
  • 60 W USB Type-C fast-charge port

What the GR701 E-ATX case is and who it fits

The Corn Electronics GR701 is a full-tower chassis built for E-ATX boards up to 12 by 10.9 inches, plus ATX, Micro-ATX and Mini-ITX. It targets builders who want dual 420 mm radiator support front and top, four pre-installed 140 mm PWM fans and a metal GPU holder for cards up to 460 mm long. The 34 mm cable routing space keeps wiring tidy. It is not for buyers who need a compact case or who plan a custom loop larger than 420 mm.

Capacity headroom for drives, cooling and power

Five dedicated 2.5 inch bays and two combo 2.5/3.5 inch bays give room for multiple SSDs and hard drives. Front and top each accept 120, 140, 240, 280, 360 or 420 mm radiators; the rear takes 120 or 140 mm. Maximum CPU cooler height is 190 mm and power supply length is 240 mm. Nine standard expansion slots plus three vertical slots cover most multi-GPU layouts. Builders needing more than two 3.5 inch drives or a PSU longer than 240 mm will run out of space.

What the bundled accessories change

Four 140 mm PWM fans are factory fitted at front and rear, delivering immediate airflow without extra purchases. An integrated ARGB fan hub and LED control button on the front panel let you sync lighting through motherboard software. Front I/O includes 4 x USB 3.2 Gen 1, 1 x USB 3.2 Gen 2 Type-C and a USB 4.0 or USB 3.2 Gen 2x2 Type-C port depending on region, plus a 60 W fast-charging port. Removable dust filters on front, top and bottom simplify maintenance. The package adds no extra mounting brackets or fan splitters beyond what is listed.

Najważniejsze cechy

  • Supports E-ATX boards up to 12 by 10.9 inches
  • Dual 420 mm radiator mounts front and top
  • Four 140 mm PWM fans pre-installed
  • Metal GPU holder and vertical slot kit
  • 60 W USB Type-C fast-charge port

Specyfikacja

Modelinternational version
TypeATX Full Tower

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will my E-ATX board with a 190 mm cooler and 460 mm GPU fit alongside the pre-installed 140 mm fans?

Yes. The case accepts E-ATX boards up to 12 by 10.9 inches, allows a 190 mm CPU cooler, a 460 mm graphics card and still has room for the three front and one rear 140 mm PWM fans already installed.

How can I confirm the ARGB lighting and the USB 4.0 or 3.2 Gen 2x2 Type-C port are functioning after the build?

Press the LED control button on the front panel to cycle lighting modes, and connect a USB 4.0 or 3.2 Gen 2x2 Type-C device to the front port to verify the high-speed link.

Which fans, hub and accessories ship inside the box, and what must I purchase separately?

The box includes three 140 mm PWM front fans, one 140 mm PWM rear fan, an ARGB fan hub, a metal GPU holder, removable dust filters for front, top and bottom, and mounting hardware. No drives, PSU or additional cables are included.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.