DELL
DELL 1.92TB SATA 2.5" Enterprise SSD 55J8H S4610
A 1.92 TB SATA enterprise SSD in a 2.5 inch form factor for mixed-use server workloads
- InterfaceSATA
- 92 TB capacity for mixed-use workloads
- SATA 6 Gbps interface for broad server compatibility
- 7 mm 2.5-inch form factor fits dense chassis
- TLC NAND balanced for read-intensive and write-intensive tasks
- Validated for Dell PowerEdge XR5610 and XR7620
Dell SATA SSD 1.92 TB 2.5 inch
This Dell enterprise SSD delivers 1.92 TB of storage through a SATA interface in a 2.5 inch 7 mm form factor. It uses mixed-use TLC flash and is validated for Dell PowerEdge XR5610 and XR7620 servers. The drive arrives new with updated firmware.
Suits mixed-use server workloads needing SATA
It fits administrators expanding capacity in compatible PowerEdge platforms that accept 7 mm 2.5 inch SATA drives. It is not for systems requiring a different physical height, a different connector, or a drive class optimised for write-intensive or read-only endurance profiles.
Interface and form factor decide fit
The single specification that determines compatibility is the SATA 6 Gbps interface combined with the 7 mm 2.5 inch form factor. Only bays and controllers designed for that exact combination will accept the drive.
Najważniejsze cechy
- 92 TB capacity for mixed-use workloads
- SATA 6 Gbps interface for broad server compatibility
- 7 mm 2.5-inch form factor fits dense chassis
- TLC NAND balanced for read-intensive and write-intensive tasks
- Validated for Dell PowerEdge XR5610 and XR7620
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 55J8H, SSDSC2KG019T8R |
| Interface | SATA |
Pytania dotyczące tego produktu
How much power does the 1.92TB S4610 draw during all-day mixed-use workloads?
The SATA 6Gbps interface limits peak power to the standard 2.5-inch envelope, and the mixed-use TLC design balances read-heavy and write-heavy phases without sustained thermal spikes.
Which drive bay and cabling must my server already provide for the 7mm 2.5-inch S4610?
A 2.5-inch hot-plug bay with a SATA backplane connector and 7mm clearance is required; the drive uses the standard SATA data and power pins.
Will the S4610 work in a PowerEdge XR5610 or XR7620 alongside older SATA SSDs?
Yes, the drive is validated for the XR5610 and XR7620 and shares the SATA 6Gbps interface with earlier Dell enterprise SSDs, so mixed generations operate on the same backplane.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
