DELL
DELL 2FX1T 20TB 7.2K 512e 12Gbps SAS 3.5 internal hard drive
20 TB 3.5-inch SAS hard drive spinning at 7.2K RPM with 512e formatting and 12 Gbps transfer rate for Dell PowerEdge servers
- Capacity20TB
- InterfaceSAS
- 20 TB capacity supports large data workloads
- 2 K rpm spindle delivers steady throughput
- 512e sector format eases legacy system integration
- 12 Gbps SAS interface enables fast host communication
- Compatible with Dell PowerEdge R750, R760 and T550 servers
20TB SAS 3.5 drive
This 20TB SAS hard drive uses a 3.5 inch form factor and a 12Gbps interface. It is built for Dell PowerEdge servers that need high-capacity nearline storage. The 512e format works with controllers that expect 512 byte logical sectors. It suits IT teams adding bulk capacity to compatible arrays.
7.2K RPM thermals and power
The drive spins at 7.2K RPM and is designed for continuous operation in rack and tower chassis. Normal use keeps thermals within the server cooling envelope without extra airflow planning. Power draw follows standard nearline SAS profiles for this capacity class. Acoustic output is typical for enterprise 3.5 inch drives in a populated bay.
Fits PowerEdge bays and backplanes
The drive mounts directly in 3.5 inch hot-plug bays on the listed PowerEdge models from the R250 through the R7725 and T150 through T550. It requires a SAS backplane or HBA that supports 12Gbps signalling and 512e sector emulation. No adapter brackets or interposers are needed when the chassis matches the compatibility list. It frees smaller bays for other workloads.
Najważniejsze cechy
- 20 TB capacity supports large data workloads
- 2 K rpm spindle delivers steady throughput
- 512e sector format eases legacy system integration
- 12 Gbps SAS interface enables fast host communication
- Compatible with Dell PowerEdge R750, R760 and T550 servers
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 2FX1T, MG11SCA20TEY |
| Capacity | 20TB |
| Interface | SAS |
Pytania dotyczące tego produktu
How do I install the 20TB 3.5 SAS drive in a PowerEdge R750 and what step is often missed?
Slide the 3.5 SAS drive into a hot-plug bay until the carrier clicks, then verify the controller sees the 512e logical block size before formatting.
What maintenance or replacement will the 20TB 7.2K SAS drive need over time?
The 7.2K spindle bearings and SAS interface are sealed; plan replacement when SMART reallocated-sector counts rise or after the rated workload limit is reached.
What limit appears first on the 20TB 12Gbps SAS drive during sustained writes?
The 12Gbps SAS link and 7.2K rotational speed cap sustained throughput well below the 20TB capacity ceiling.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
