DELL
DELL 3C46W 1TB 3.5" SATA 7200 RPM internal hard drive
1TB 3.5" SATA internal hard drive spinning at 7200 RPM for desktop storage systems
- PackagingBare Drive
- InterfaceSATA
- Capacity1TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- 1 TB capacity for bulk storage
- 7200 RPM spindle for responsive access
- SATA 600 interface for wide compatibility
- 5 inch form factor fits standard bays
- Dell part 3C46W validated for NX430 systems
Dell 3C46W 1TB SATA Hard Drive
The Dell 3C46W is a 1TB 3.5-inch internal hard drive spinning at 7200 RPM with a SATA 6Gb/s interface. It is supplied as a bare drive and carries the original Dell part number 3C46W for use in compatible Dell storage systems.
Suited for server storage expansion
This drive fits administrators adding capacity to a Dell Storage NX430 or similar Dell platforms that accept 3.5-inch SATA drives. Buyers needing a smaller 2.5-inch form factor or a different interface should look elsewhere.
SATA 6Gb/s interface
The drive communicates over a SATA 6Gb/s connection, so the host system must provide a compatible SATA port. Verify that your chassis and controller support 3.5-inch SATA drives before purchase.
Najważniejsze cechy
- 1 TB capacity for bulk storage
- 7200 RPM spindle for responsive access
- SATA 600 interface for wide compatibility
- 5 inch form factor fits standard bays
- Dell part 3C46W validated for NX430 systems
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 3C46W |
| Packaging | Bare Drive |
| Interface | SATA |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Pytania dotyczące tego produktu
Will this 3C46W drive work in a standard desktop that only has SATA 3 Gb/s ports?
Yes, the SATA 6 Gb/s interface is backward compatible with SATA 3 Gb/s ports, so the drive will operate at the lower speed without any extra configuration.
Can I keep my existing 3.5" drive cage when installing this 3C46W drive?
The drive uses the standard 3.5" form factor, so it fits the same bays and mounting points as other 3.5" SATA drives you may already have installed.
How can I confirm the 3C46W is running at its rated 7200 RPM after installation?
Check the drive's reported spindle speed in your BIOS or a SMART monitoring tool; it should show 7200 RPM when the drive is active.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
