DELL
DELL 400-AFMO 1.2TB 2.5" SAS 10K 6Gb/s internal hard drive
A 1.2TB 2.5" SAS drive spinning at 10000 RPM with hot-swap capability for rapid server storage upgrades
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 6 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Dell 400-AFMO 1.2TB SAS Drive
The Dell 400-AFMO is a 1.2TB 2.5" internal hard drive with a SAS 6Gb/s interface spinning at 10000 RPM. It is built for servers and storage arrays that require hot-swap capability and enterprise-grade reliability.
Suits High-IO Workloads Not Archive Storage
This drive suits administrators who need low latency and consistent throughput for databases or virtualisation. It is not for users seeking maximum capacity per bay for cold data or backup archives where rotational speed is secondary.
10000 RPM Spindle Speed
The 10000 RPM spindle speed determines the drive's random access performance and sustained transfer rates. Verify that your controller and backplane support this rotational speed and the SAS 6Gb/s link before purchase.
Najważniejsze cechy
- 2 TB capacity stores large datasets
- 10,000 RPM spindle delivers fast data access
- SAS 6 Gb/s interface enables high-throughput transfers
- 5 inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 400-AFMO |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Pytania dotyczące tego produktu
What controller or backplane do I need to connect the SAS 6Gb/s interface on this drive?
You need a SAS host-bus adapter, RAID card or server backplane that supports 6Gb/s SAS signalling and provides power to a 2.5" hot-swap bay.
Will the 1.2TB 10000 RPM drive share a SAS backplane with older 3Gb/s SAS disks?
Yes — the drive negotiates down to 3Gb/s on a legacy backplane, though sustained throughput will be limited to the slower link speed.
How can I verify the drive is running at 10000 RPM and 6Gb/s after installation?
Check the controller BIOS or management utility; it should report 10K RPM and a negotiated link rate of 6Gb/s for this device.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
