DELL
DELL 400-AJPC 1.2TB 10000RPM SAS 2.5" internal hard drive
A 1.2TB 10000RPM SAS 2.5" internal hard drive for Dell PowerEdge servers
- InterfaceSAS
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- Fast disk access from 10000 RPM spindle speed
- Enhanced data transfer via 12Gb/s SAS interface
- 2TB capacity expands server storage
- Hot-pluggable 2.5" drive in 3.5" hybrid carrier
- Compatible with Dell PowerEdge R330 R430 R530 R630 R730 R730XD T330 T430 T630
Dell 1.2TB 10K SAS Server Drive
This Dell 400-AJPC hard drive adds 1.2TB of storage to compatible PowerEdge servers. It operates at 10000 RPM with a SAS interface for fast disk access. The drive uses a 2.5 inch form factor inside a 3.5 inch hybrid carrier. It is designed for hot-plug installation in supported Dell systems.
Suits PowerEdge R330 R430 R530 R630 R730 R730XD
This drive fits the listed Dell PowerEdge rack and tower servers that accept 2.5 inch SAS hot-plug drives. Buyers needing more capacity per bay should evaluate other options. Systems without SAS backplanes or hot-plug bays cannot use this drive.
12Gb/s SAS Interface Standard
The drive connects via a 12Gb/s SAS interface, which determines compatibility with the server backplane and controller. Verify that your system supports this interface standard before purchase. The 10000 RPM spindle speed and 1.2TB capacity are fixed by this specific part number.
Najważniejsze cechy
- Fast disk access from 10000 RPM spindle speed
- Enhanced data transfer via 12Gb/s SAS interface
- 2TB capacity expands server storage
- Hot-pluggable 2.5" drive in 3.5" hybrid carrier
- Compatible with Dell PowerEdge R330 R430 R530 R630 R730 R730XD T330 T430 T630
Specyfikacja
| Interface | SAS |
|---|---|
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Pytania dotyczące tego produktu
Does the 2.5-inch drive fit in a 3.5-inch bay with the included hybrid carrier?
The drive ships in a 3.5-inch hybrid carrier that adapts the 2.5-inch form factor for standard server bays.
How is the hot-plug SAS drive installed in a PowerEdge server?
Slide the carrier into an empty hot-plug bay until the latch clicks; the SAS backplane handles power and data without cables.
When should the 1.2 TB 10000 RPM drive be replaced in a RAID array?
Replace the drive if the RAID controller reports predictive failure, media errors or degraded performance during rebuilds.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
