DELL
DELL 400-ALCK 6TB 7.2K SAS 3.5" 12Gb/s internal hard drive
A 6 TB enterprise-class 3.5-inch drive spins at 7200 RPM and connects via 12 Gb/s SAS
- 6 TB capacity stores large data sets
- 7200 RPM spindle speed delivers fast sequential access
- SAS 12 Gb/s interface provides high-throughput connectivity
- 5 inch form factor fits standard drive bays
- New condition ensures full manufacturer reliability
6 TB SAS drive for enterprise storage
The Dell 400-ALCK is a 3.5-inch internal hard drive with a 6 TB capacity and a 12 Gb/s SAS interface. It spins at 7200 RPM and is built to enterprise-class specifications for continuous operation in compatible servers and storage arrays.
Replaces lower-capacity or slower SAS drives
The jump is worth it when a system needs more raw capacity on the same SAS backplane or when a 7.2 K RPM spindle improves throughput over 5.4 K alternatives. It fits 13G Dell platforms that accept the ST6000NM0095 mechanism without requiring a protocol change.
Fits 3.5-inch SAS bays with 12 Gb/s controllers
The drive needs a SAS host bus adapter or RAID controller that supports 12 Gb/s speeds and a chassis with 3.5-inch drive bays and appropriate power connectors. It frees up bay count by delivering 6 TB per slot, reducing the number of spindles required for a given volume target.
Najważniejsze cechy
- 6 TB capacity stores large data sets
- 7200 RPM spindle speed delivers fast sequential access
- SAS 12 Gb/s interface provides high-throughput connectivity
- 5 inch form factor fits standard drive bays
- New condition ensures full manufacturer reliability
Specyfikacja
Na razie brak opublikowanej specyfikacji tego produktu.
Pytania dotyczące tego produktu
Will the 3.5'' SAS drive fit a standard 3.5-inch drive bay in a 13G Dell server?
Yes, the 3.5'' form factor matches standard 3.5-inch hot-plug bays used in 13G Dell PowerEdge servers; the SAS connector aligns with the backplane.
How is the 400-ALCK installed in a hot-plug tray, and what step is often missed?
Slide the drive into the carrier until the SAS connector seats firmly on the backplane, then lock the lever; the step often missed is fully engaging the lever latch.
When should the 6 TB 7200 RPM SAS drive be replaced in a RAID array?
Replace the drive when SMART reallocated-sector counts rise or the RAID controller flags predictive failure; rebuild the array promptly after swapping.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
