DELL
DELL 400-ANYT 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
An 8 TB 3.5" SAS drive spinning at 7200 RPM with a 12 Gb/s interface and hot-swap support
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 8 TB capacity stores large data sets
- 12 Gb/s SAS interface moves files quickly
- 7200 RPM spindle speed delivers responsive access
- 5 inch form factor fits standard drive bays
- Hot-swap tray enables drive changes without downtime
Dell 400-ANYT 8TB Nearline SAS Drive
The Dell 400-ANYT is an 8TB 3.5-inch Nearline SAS hard drive built for servers and storage arrays that need high-capacity bulk storage. It suits IT teams expanding RAID pools, backup targets or archive volumes in Dell PowerEdge and compatible enclosures.
8TB capacity with 12Gb/s SAS headroom
Eight terabytes provide ample space for sequential workloads such as video surveillance, log aggregation or cold data tiering. The 12Gb/s SAS interface and 7200 RPM spindle keep sustained transfers steady, while random I/O and latency remain limited by mechanical physics.
Hot-swap tray replaces fixed-mount SAS drives
The hot-swap tray lets administrators swap failed units without powering down the chassis, cutting downtime compared with fixed-mount drives. The upgrade is worthwhile when maintenance windows are tight or when scaling an existing 12Gb/s SAS backplane beyond its current spindle count.
Najważniejsze cechy
- 8 TB capacity stores large data sets
- 12 Gb/s SAS interface moves files quickly
- 7200 RPM spindle speed delivers responsive access
- 5 inch form factor fits standard drive bays
- Hot-swap tray enables drive changes without downtime
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 400-ANYT |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Pytania dotyczące tego produktu
Will the 12Gb/s SAS interface on this 400-ANYT drive work with my existing 6Gb/s SAS backplane?
Yes, the SAS 12Gb/s interface is backward compatible with 6Gb/s and 3Gb/s SAS controllers and backplanes, so the drive will operate at the speed your current hardware supports.
How can I verify the 7200 RPM spindle speed and 12Gb/s link are active after installation?
Check the drive’s reported rotational speed and negotiated link rate in your RAID controller BIOS, HBA utility, or OS disk-management tools; they should show 7200 RPM and a 12Gb/s connection.
Does the bare-drive 400-ANYT package include a 3.5" hot-swap tray or mounting screws, or must I source them separately?
The drive ships as a bare unit without a hot-swap tray or screws; you will need to supply a compatible 3.5" SAS hot-swap tray and any required mounting hardware for your chassis.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



