DELL
DELL 400-AUWX 2TB 3.5" SATA 7200 RPM internal hard drive
A 2 TB 3.5" SATA internal hard drive spinning at 7200 RPM for Dell PowerEdge servers and towers
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity2TB
- RPM7200 RPM
- Average Latency6Gb/s
- Form Factor3.5"
- 2 TB capacity stores large data volumes
- 7200 RPM spindle speed ensures responsive performance
- SATA 6.0Gb/s interface delivers high transfer rates
- 5" form factor fits standard desktop bays
- Compatible with Dell PowerEdge R430, R530, R730, T430, T440, T640 servers
2 TB 3.5" SATA hard drive
This new Dell 400-AUWX is a 3.5-inch internal hard drive with a 2 TB capacity, a SATA 6.0 Gb/s interface and a 7200 RPM spindle speed. It is supplied as a bare drive in non hot-swap configuration. The drive is designed for desktop and server systems that accept 3.5-inch SATA storage.
Suits Dell PowerEdge servers and compatible desktops
The drive fits Dell PowerEdge R430, R530, R730, T430, T440 and T640 systems that take 3.5-inch SATA drives. Builders needing hot-plug capability, SAS interface or a different capacity should look at other models.
SATA 6.0 Gb/s interface decides fit
The single specification that determines compatibility is the SATA 6.0 Gb/s interface combined with the 3.5-inch non hot-swap form factor. Your system must provide a standard SATA data and power connection for this drive to work.
Najważniejsze cechy
- 2 TB capacity stores large data volumes
- 7200 RPM spindle speed ensures responsive performance
- SATA 6.0Gb/s interface delivers high transfer rates
- 5" form factor fits standard desktop bays
- Compatible with Dell PowerEdge R430, R530, R730, T430, T440, T640 servers
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 400-AUWX |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
| Waga przesyłki | 0.68 kg |
| Wymiary opakowania | 140 × 89 × 51 mm |
Pytania dotyczące tego produktu
Will the 3.5" form factor fit a standard desktop drive bay?
Yes, the 3.5" form factor matches standard desktop internal bays and uses the common SATA 6.0Gb/s interface for power and data cables.
How do I install this non hot-swap drive in a Dell PowerEdge R730 and what step is often missed?
Power down the server completely, open the chassis, secure the drive in a 3.5" caddy, connect both SATA data and power cables, then configure the RAID controller before booting the OS.
When should I expect to replace this 7200 RPM mechanical drive in a server workload?
Mechanical drives at 7200 RPM typically show wear after three to five years of continuous server use; monitor SMART attributes and plan replacement before reallocated sectors increase.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



