DELL
DELL 400-AUXJ 1.2TB 10K SAS 2.5" 12Gb internal hard drive
1.2 TB 10K SAS 2.5" drive with 12 Gb/s interface for R640, R740, R740XD, R940 and C6420 servers
- 2TB capacity stores large datasets
- 10K RPM rotation speeds up data access
- 12Gb SAS interface moves data quickly
- 5-inch form factor fits dense servers
- Compatible with PowerEdge R640 R740 R740XD R940 C6420
1.2 TB 10K SAS drive for Dell servers
This 2.5-inch hard drive delivers 1.2 TB of storage with a 10K rotational speed over a 12 Gb SAS interface. It is supplied as a new drive kit intended for direct installation in compatible Dell PowerEdge systems. The SAS connection provides dual-port reliability for enterprise workloads.
Suits Dell R640 R740 R740XD R940 C6420 bays
The drive kit fits the 2.5-inch bays of the listed PowerEdge models and is built for environments that demand consistent 10K performance. It is not for users who need higher capacity per drive, SATA-only controller support, or 3.5-inch form-factor compatibility.
12 Gb SAS interface decides controller fit
The drive requires a 12 Gb SAS backplane or HBA to operate at its rated speed and dual-port capability. Connecting it to a 6 Gb SAS or SATA-only controller will limit performance or prevent detection, so verify the host interface before purchase.
Najważniejsze cechy
- 2TB capacity stores large datasets
- 10K RPM rotation speeds up data access
- 12Gb SAS interface moves data quickly
- 5-inch form factor fits dense servers
- Compatible with PowerEdge R640 R740 R740XD R940 C6420
Specyfikacja
Na razie brak opublikowanej specyfikacji tego produktu.
Pytania dotyczące tego produktu
How do I install the 400-AUXJ 2.5" SAS drive in a Dell PowerEdge R740 and which step is often missed?
Slide the drive into a 2.5" hot-swap bay until the carrier clicks, then verify the 12Gb SAS link in the RAID controller BIOS — the step often missed is seating the carrier latch fully so the SAS connector engages.
What maintenance or replacement will the 1.2TB 10K SAS drive need over its service life?
Plan to replace the drive after the rated workload limit is reached or if SMART attributes report reallocated sectors; no field-serviceable parts exist inside the sealed helium enclosure.
What limit appears first on the 400-AUXJ during sustained 12Gb SAS writes?
The 10K RPM spindle caps sustained throughput before the 12Gb SAS bus saturates, so sequential write speed plateaus at the mechanical media rate.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
