DELL
DELL 4TB 7.2K SAS 12Gb/s 3.5" internal hard drive with tray F238F
Stores 4 TB of enterprise data on a 3.5" SAS 12 Gb/s drive spinning at 7,200 RPM and supplied with a Dell tray
- InterfaceSAS 12Gb/s
- Capacity4TB
- RPM7200 RPM
- Form Factor3.5"
- 4 TB capacity stores large enterprise datasets
- SAS 12 Gb/s interface provides high data transfer speed
- 7 200 RPM spindle speed ensures strong performance
- 5 inch LFF form factor fits compatible servers
- New Dell original drive includes tray for PowerEdge systems
DELL 4TB SAS drive for PE servers
This DELL 4TB SAS 12Gb/s hard drive ships new with a tray for direct installation in compatible PowerEdge servers. It targets administrators who need 4TB of enterprise storage in a 3.5-inch bay. The 7200 RPM spindle speed supports sustained read and write workloads typical of nearline applications. Buyers who need higher capacity or a different form factor should verify server specifications before ordering.
Installation and common issues
The included tray matches the drive sled used in supported PE servers, so the drive slides into the bay without extra brackets. A frequent issue is inserting the drive into a chassis that only accepts 2.5-inch carriers or that limits total SAS port count. Confirm the server backplane supports SAS 12Gb/s signalling and that the firmware recognises the F238F part number. Mismatched cabling or an unsupported backplane will prevent the drive from appearing to the controller.
Sustained load behaviour
At 7.2K RPM the drive delivers consistent throughput for sequential workloads such as backup, archival and bulk data ingest. The SAS 12Gb/s interface maintains link speed during extended transfers without the latency spikes seen on slower interfaces. Thermal output remains stable in a ventilated server chassis designed for 3.5-inch LFF drives. Workloads demanding low-latency random IOPS may require a faster spindle speed or solid-state media.
Najważniejsze cechy
- 4 TB capacity stores large enterprise datasets
- SAS 12 Gb/s interface provides high data transfer speed
- 7 200 RPM spindle speed ensures strong performance
- 5 inch LFF form factor fits compatible servers
- New Dell original drive includes tray for PowerEdge systems
Specyfikacja
| Interface | SAS 12Gb/s |
|---|---|
| Capacity | 4TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Pytania dotyczące tego produktu
How can I verify the 7200 RPM drive is spinning correctly after installing it in a PowerEdge server?
The drive should appear in the RAID controller BIOS at 4TB with a SAS 12Gb/s link speed and no SMART errors reported.
Does the F238F tray come attached or do I need a separate caddy for my 3.5" bay?
The tray is included with the drive so it fits directly into a compatible 3.5" hot-swap bay.
Should I choose the 4TB 7.2K SAS model or a larger capacity for my PE server array?
Select the 4TB version when your configuration calls for 3.5" LFF drives and the total raw capacity meets your RAID layout.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
