DELL
DELL 67D8C 400GB SATA 1.8 Enterprise SSD
A 400 GB SATA enterprise SSD built for mixed-use workloads in compatible Dell PowerEdge servers
- InterfaceSATA
- 400 GB capacity supports mixed-use enterprise workloads
- SATA 6 Gbps interface integrates with existing server storage controllers
- 8 inch form factor fits Dell PowerEdge FC430, FC630, FC830, M630, M830, R330, R630, R730xd
- MLC NAND delivers consistent performance for read-intensive and write-intensive applications
- Components tested and firmware updated for reliable deployment
400 GB SATA enterprise SSD for Dell PowerEdge
This 400 GB solid-state drive uses a SATA 6 Gbps interface and multi-level cell flash rated for mixed-use workloads. It fits 1.8-inch bays in Dell PowerEdge FC430, FC630, FC830, M630, M830, R330, R630 and R730xd servers. The drive is new, tested and shipped with updated firmware.
Thermals, noise and power in normal use
As a solid-state device with no moving parts, the drive operates silently and generates minimal heat inside the server chassis. Power draw follows the SATA 6 Gbps specification for mixed-use MLC drives, keeping thermal load low in densely populated bays. No active cooling is required beyond standard server airflow.
Bundled software and accessories
The unit ships as a bare drive with current firmware installed; no mounting hardware, cables or management utilities are included. Dell OpenManage or iDRAC tools on the host server handle monitoring and configuration. Buyers needing trays, screws or a fresh OS installation must source those separately.
Najważniejsze cechy
- 400 GB capacity supports mixed-use enterprise workloads
- SATA 6 Gbps interface integrates with existing server storage controllers
- 8 inch form factor fits Dell PowerEdge FC430, FC630, FC830, M630, M830, R330, R630, R730xd
- MLC NAND delivers consistent performance for read-intensive and write-intensive applications
- Components tested and firmware updated for reliable deployment
Specyfikacja
| Brand | Dell |
|---|---|
| Model | 67D8C, SSDSC1BG400G4R |
| Interface | SATA |
Pytania dotyczące tego produktu
How do I install the 1.8 inch SATA SSD into a PowerEdge R630 and what step is often missed?
Slide the drive into the 1.8 inch bay until the SATA connector seats firmly; the step often missed is securing the retention latch so the drive cannot work loose under vibration.
What maintenance or replacement will the MLC NAND require over its service life?
The MLC NAND has a finite write endurance; once the reserved spare blocks are exhausted the drive will switch to read-only mode and must be replaced.
At what point does the 6Gbps SATA link become the bottleneck during sustained mixed-use workloads?
Under continuous mixed reads and writes the 6Gbps SATA interface saturates first, capping throughput well before the MLC NAND reaches its internal limits.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
