DELL
DELL ST1200MM0007 1.2TB SAS 10000 RPM 2.5" internal hard drive
A 1.2 TB SAS drive spinning at 10000 RPM in a 2.5 inch form factor for enterprise storage arrays
- InterfaceSAS 6Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- High-speed 10000 RPM SAS drive accelerates transaction workloads
- 2TB capacity stores large datasets on a single spindle
- 5-inch form factor fits dense server and storage arrays
- SAS 6Gb/s interface delivers consistent throughput for enterprise applications
- Dell RMCP3 part number ensures validated compatibility with supported systems
Capacity and interface
The Dell ST1200MM0007 is a 1.2TB SAS 6Gb/s internal hard drive built for 2.5-inch bays. It suits servers and storage arrays that need 10000 RPM performance in a compact form factor. The drive is new and carries Dell part number RMCP3.
Thermals noise and power
Spinning at 10000 RPM, the drive generates typical enterprise heat and audible seek noise under load. Power draw follows standard 2.5-inch SAS specifications for this spindle speed. No additional cooling or acoustic data is supplied.
Packing and compatibility
The unit ships in either retail or OEM packaging depending on stock. No cables, brackets or management software are included in the box. Buyers who need mounting hardware or a SAS host adapter must source those separately.
Najważniejsze cechy
- High-speed 10000 RPM SAS drive accelerates transaction workloads
- 2TB capacity stores large datasets on a single spindle
- 5-inch form factor fits dense server and storage arrays
- SAS 6Gb/s interface delivers consistent throughput for enterprise applications
- Dell RMCP3 part number ensures validated compatibility with supported systems
Specyfikacja
| Interface | SAS 6Gb/s |
|---|---|
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Pytania dotyczące tego produktu
How do I install this 2.5" SAS drive in a 3.5" server bay and which step is often missed?
Use a 2.5" to 3.5" adapter tray, secure the drive with four screws, connect the SAS data and power cables, then enable the drive in the RAID controller BIOS before the OS will see it.
What part of this 10000 RPM drive is most likely to need replacement after heavy use?
The spindle motor and bearing assembly wear first under constant 10000 RPM operation, so plan for a full drive swap once SMART reallocated-sector counts rise.
Which limit appears first on this 1.2TB SAS drive during sustained writes?
The 10000 RPM mechanical latency and SAS 6Gb/s bus ceiling cap sustained throughput, so sequential writes flatten out well below the interface maximum.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
