Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black mid-tower case with tempered glass side panel and claw-pattern mesh front

GAMEMAX

GAMEMAX Leader 2 BK PC case

SKU CH-6E3G-N6H2J MPN Leader 2 BK

Mid-tower case fitting E-ATX boards, 425mm GPUs and 420mm radiators with four pre-installed 140mm ARGB PWM fans and USB Type-C Gen 2 front I/O

  • TypeE-ATX
  • ColorBlack
  • Motherboard CompatibilityE-ATX?ATX?M-ATX?ITX
  • Side Panel1 x Side Tempered Glass Panel
  • Dust FiltersBottom / Top
  • Internal 3.5" Drive Bays2
  • Supports E-ATX boards and 425mm GPUs for versatile builds
  • 420mm radiator capacity and eight 140mm mounts enable high-performance cooling
  • Four pre-installed 140mm ARGB PWM fans with dedicated controller simplify airflow setup
  • Tool-free design, vertical GPU support and hidden cable routing speed up assembly
  • Type-C Gen 2 and dual USB 3.0 ports provide modern front-panel connectivity

Mid-tower case for high-end builds

The GAMEMAX Leader 2 BK is a black mid-tower chassis that accepts E-ATX, ATX, M-ATX and ITX motherboards. It comes with a tempered glass side panel, dust filters on the bottom and top, and space for two 3.5-inch drives plus three 2.5-inch drives. The open-box condition means the unit was previously unpacked but is fully functional.

GPU clearance of 425 mm

The single figure that decides fitment is the maximum graphics-card length of 425 mm. This allows virtually all current triple-slot cards to install without touching the front panel. Builders planning longer custom-loop reservoirs or unusually deep power supplies should verify their own measurements against the 245 mm PSU limit and 185 mm air-cooler height.

Four pre-installed 140 mm ARGB PWM fans

The case ships with three 140 mm fans at the front and one at the rear, all connected to an included ARGB PWM controller. Top mounts support up to 420 mm radiators, while the front and rear accept 120 mm, 140 mm, 240 mm, 280 mm and 360 mm units. Noise and thermals will depend on the fan curves you set and the components you install.

Najważniejsze cechy

  • Supports E-ATX boards and 425mm GPUs for versatile builds
  • 420mm radiator capacity and eight 140mm mounts enable high-performance cooling
  • Four pre-installed 140mm ARGB PWM fans with dedicated controller simplify airflow setup
  • Tool-free design, vertical GPU support and hidden cable routing speed up assembly
  • Type-C Gen 2 and dual USB 3.0 ports provide modern front-panel connectivity

Specyfikacja

BrandGAMEMAX
SeriesMid Tower Gaming Case
LEADER 2 BK
ModelLeader 2 BK
TypeE-ATX
ColorBlack
Motherboard CompatibilityE-ATX?ATX?M-ATX?ITX
Side Panel1 x Side Tempered Glass Panel
Dust FiltersBottom / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Fan OptionsFront - 3 x 140mm / Rear - 1 x 140mm / Top - 2 x 140mm / Top - 3 x 120mm
Pre-installed FansFront - 3 x 140mm / Rear - 1 x 140mm
Radiator Installed420mm radiators
Radiator OptionsFront - Up to 120mm / Front - Up to 140mm / Front - Up to 240mm / Front - Up to 280mm / Front - Up to 360mm / Front - Up to 420mm / Rear - Up to 120mm / Rear - Up to 140mm / Top - Up to 120mm / Top - Up to 140mm / Top - Up to 240mm / Top - Up to 280mm / Top - Up to 360mm
120mm Fans9
Max GPU Length425mm GPU
Max PSU Length245mm PSU
Dimensions19.69 x 18.74 x 9.25 inch
Weight9.2kg
Waga przesyłki10.43 kg
Wymiary opakowania584 × 559 × 305 mm

Pytania dotyczące tego produktu

How does the 425mm GPU clearance translate when the front fans are installed?

The 425mm limit already accounts for the three pre-installed 140mm front fans, so any graphics card up to that length fits without removing them.

What front-panel USB standard does the Type-C port use and what throughput does it provide?

The front I/O includes a USB Type-C Gen 2 port alongside two USB 3.0 ports for high-speed peripheral connections.

Will a 420mm radiator fit in the front with the stock fans in place?

Yes, the front mount supports radiators up to 420mm and the pre-installed 140mm fans can be moved to the top or rear if needed.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.