Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two silver 90° rotary extender fittings G1/4" nickel-plated brass

greenDracaena

greenDracaena D-90-Rotary 90° rotary extender fitting G1/4" 2 pack Silver

SKU CH-PX5K-26A1S

Two nickel-plated brass 90° rotary extenders with G1/4" threads and 360° adjustment for leak-free custom water loops

  • Radiator Size2 pcs
  • Fan Size2 pcs
  • Fan Dim.5.0 in x 3.0 in x 3.0 in
  • LED ColorSilver (90 Rotary)
  • Nickel-plated brass resists corrosion for long-term loop reliability
  • 90° rotary design with 360° top rotation aligns tubing precisely
  • G1/4" BSP threads with 5 mm male and 6 mm female depth ensure secure fit
  • Embedded O-ring creates leakproof seal under pressure
  • Two-pack supplies matching extenders for symmetrical custom water-cooling builds

Two-pack 90° G1/4" rotary extenders

This pair of silver 90° rotary extenders connects G1/4" BSP male and female threads in custom water-cooling loops. Nickel-plated brass construction resists corrosion and handles the pressure of rigid, metal or PETG tubing. The 360° swivel head lets you orient the outlet precisely without stressing the tube run. Supplied as a two-pack for parallel or series routing.

Hand-tight install with embedded O-ring

Each extender has a 5 mm male thread and a 6 mm female thread that engage cleanly with standard G1/4" ports. The captive O-ring seals on first contact so no separate washer is needed and the joint stays leak-free after a firm hand-tight turn. Over-tightening with tools can strip the brass threads, so stop when resistance spikes. The rotary joint should spin freely before final positioning.

Verify port depth and clearance before ordering

Confirm that your blocks, radiators and reservoirs expose at least 5 mm of male thread and accept a 6 mm female bore. Measure the space around each port; the 90° bend adds lateral offset that can foul adjacent fittings or case panels. Ensure your tubing material and bend radius are compatible with the fixed 90° angle.

Najważniejsze cechy

  • Nickel-plated brass resists corrosion for long-term loop reliability
  • 90° rotary design with 360° top rotation aligns tubing precisely
  • G1/4" BSP threads with 5 mm male and 6 mm female depth ensure secure fit
  • Embedded O-ring creates leakproof seal under pressure
  • Two-pack supplies matching extenders for symmetrical custom water-cooling builds

Specyfikacja

BrandgreenDracaena
SeriesSilver (90 Rotary)
ModelD-90-Rotary
Part NumberD-90-Rotary-Silver-2-S
Radiator Size2 pcs
Fan Size2 pcs
Fan Dim.5.0 in x 3.0 in x 3.0 in
LED ColorSilver (90 Rotary)

Pytania dotyczące tego produktu

How can I confirm the 90° rotary extender is seated and leak-free after installation?

Tighten the G1/4" BSP threads until the embedded O-ring compresses, then rotate the top 360° to the desired angle; pressure-test the loop and verify no fluid escapes from the male or female threads.

What comes in the 2-pack and what additional parts are required?

Two nickel-plated brass 90° rotary fittings with G1/4" male and female threads are included; tubing, clamps, coolant and a pump must be purchased separately.

Which version should I choose for a standard G1/4" custom loop?

The silver D-90-Rotary model with 5 mm male and 6 mm female thread lengths matches the common G1/4" BSP standard used in most custom water-cooling builds.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.