HP
HP 793669-B21 4TB 7200RPM SAS 3.5" internal hard drive
A 4 TB SAS internal hard drive spinning at 7200 RPM in a 3.5-inch form factor for desktop storage
- InterfaceSAS
- Capacity4TB
- RPM7200 RPM
- Form Factor3.5"
- High-capacity 4 TB storage for large data sets
- 7200 RPM spindle speed for fast sequential access
- 12 Gb/s SAS interface for enterprise-grade throughput
- 5-inch form factor fits standard drive bays
- New condition ensures full manufacturer specifications
HP 793669-B21 4TB SAS drive
The HP 793669-B21 is a 4TB internal hard drive with a 3.5 inch form factor. It spins at 7200 RPM and uses a SAS interface rated at 12Gb/s. The drive is built for enterprise servers and storage arrays that demand high capacity and sustained throughput.
Check SAS controller and bay compatibility
Verify that your server or enclosure has a SAS backplane or controller supporting 12Gb/s SAS links. The drive requires a standard 3.5 inch drive bay and appropriate power and data cabling for SAS. Confirm the system firmware recognises 4TB SAS devices before installation.
Packing may vary between retail and OEM
The drive ships in either retail or OEM packaging depending on stock. No mounting rails, screws, cables or software utilities are included in the box. Installers must supply any required hardware or management tools separately.
Najważniejsze cechy
- High-capacity 4 TB storage for large data sets
- 7200 RPM spindle speed for fast sequential access
- 12 Gb/s SAS interface for enterprise-grade throughput
- 5-inch form factor fits standard drive bays
- New condition ensures full manufacturer specifications
Specyfikacja
| Interface | SAS |
|---|---|
| Capacity | 4TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Pytania dotyczące tego produktu
Does the 793669-B21 4TB SAS drive ship with any cables or mounting brackets, or do I need to buy those separately?
The drive is supplied in retail or OEM packing that may vary; no cables, brackets or screws are guaranteed in the box.
The spec sheet lists a 12Gb/s SAS interface — is there a slower 6Gb/s version of the same 4TB model I should consider?
Only the 12Gb/s SAS variant is offered for this 4TB part; no alternative speed version exists.
What sustained transfer rate can I expect from the 7200 RPM mechanism once the drive is installed in a server?
The 7200 RPM spindle delivers typical sequential throughput around 200 MB/s, limited by the mechanical media rather than the 12Gb/s SAS link.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
