HPE
HPE K2P99A 600 GB 10000 rpm SAS 2.5" internal hard drive
A 600 GB 2.5 inch internal hard drive spinning at 10000 rpm with a SAS interface for HP 3PAR StoreServ 8000 storage systems
- 600 GB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- SAS interface connects directly to storage systems
- 5 inch form factor fits dense server bays
- Designed for HP 3PAR StoreServ 8000 compatibility
Enterprise Storage Drive
The HPE K2P99A is a 600 GB SAS hard drive built for the 3PAR StoreServ 8000 storage system. Its 2.5 inch form factor fits small form factor bays in enterprise arrays. The 10000 rpm spindle speed supports demanding random I/O workloads. This drive targets administrators expanding capacity in compatible HPE environments.
Thermals and Power Profile
A 10000 rpm mechanism generates measurable heat under sustained load; adequate chassis airflow is required to maintain safe operating temperatures. Acoustic output is typical for enterprise 10K drives and audible in quiet rooms. Power draw rises during seek intensive operations but remains within standard SAS device limits. No active cooling or special power budget is specified by the manufacturer.
Build and Connectivity
The drive uses a standard SAS connector for direct backplane attachment in supported enclosures. Physical dimensions are 5 inch height, 7 inch width and 10.5 inch depth with a weight of 6.26 lb. Compatibility is limited to the HP 3PAR StoreServ 8000 platform; it will not function in generic desktop or laptop systems. Retail or OEM packing may vary.
Najważniejsze cechy
- 600 GB capacity stores large datasets
- 10000 rpm spindle speed accelerates data access
- SAS interface connects directly to storage systems
- 5 inch form factor fits dense server bays
- Designed for HP 3PAR StoreServ 8000 compatibility
Specyfikacja
| Brand | HPE |
|---|
Pytania dotyczące tego produktu
How is the K2P99A installed in a 3PAR StoreServ 8000, and what step is often missed?
Slide the 2.5" drive into the correct SFF bay until the SAS connector seats firmly; the step often missed is verifying the carrier latch clicks fully locked so the drive cannot shift during vibration.
What maintenance or replacement will this 600 GB 10000 rpm SAS drive need later?
The mechanical spindle and actuator are the only wear items; plan to replace the drive once SMART reallocated-sector counts rise or after the rated annualised failure rate window for 10K SAS drives passes.
What limit appears first on this K2P99A during sustained write workloads?
The 10000 rpm spindle caps sustained throughput at the SAS 12 Gbit/s interface ceiling, so sequential write speed plateaus before the controller or cache becomes the bottleneck.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
