HPE
HPE MSA 84TB SAS 12G 7.2K LFF 3.5in 6-pack internal hard drive
Six 14 TB 7200 rpm SAS 12Gb/s 3.5-inch drives totalling 84 TB for HPE MSA storage systems
- 84 TB total capacity in a single 6-pack bundle
- 14 TB per drive reduces the number of bays needed
- 12 Gb/s SAS interface enables fast data throughput
- 7200 RPM spindle speed supports steady sequential performance
- 5-inch LFF form factor fits standard server drive bays
Six-Drive Bundle for MSA Arrays
This package delivers 84 TB of raw capacity across six 14 TB 3.5-inch drives built for HPE MSA storage systems. Each unit spins at 7200 rpm and connects through a 12 Gb/s SAS interface. The bundle suits administrators expanding midline tiers in existing arrays.
Steady Throughput on Midline Workloads
Sustained sequential transfers stay consistent because the 7200 rpm spindle and 12 Gb/s SAS link avoid the thermal throttling seen in burst-oriented drives. Firmware tuned for MSA controllers keeps command queues full during long backup or replication windows. Random I/O latency remains predictable under multi-stream loads.
SAS 12 Gb/s Bus Ceiling
The 12 Gb/s SAS interface caps per-drive throughput at the electrical limit of the lane, so aggregate array speed scales with drive count rather than link speed. Cable length and backplane topology set the practical distance ceiling. Workloads demanding higher single-stream bandwidth must move to a faster interface generation.
Najważniejsze cechy
- 84 TB total capacity in a single 6-pack bundle
- 14 TB per drive reduces the number of bays needed
- 12 Gb/s SAS interface enables fast data throughput
- 7200 RPM spindle speed supports steady sequential performance
- 5-inch LFF form factor fits standard server drive bays
Specyfikacja
| Brand | HPE |
|---|
Pytania dotyczące tego produktu
How much power and heat do the six 14 TB 7200 rpm SAS drives produce when running continuously?
Each 14 TB drive spins at 7200 rpm on a 12Gb/s SAS interface; the bundle delivers 84 TB total capacity in a 3.5-inch form factor designed for HPE MSA storage systems.
What host interface and drive bay size are required to install these six 3.5-inch SAS drives?
The drives use a 12Gb/s SAS interface and a 3.5-inch LFF form factor, so the host must provide SAS backplane slots that accept large-form-factor drives.
Will these 12Gb/s SAS drives work in an older HPE MSA array that only supports 6Gb/s SAS?
The drives are built to the 12Gb/s SAS standard and are qualified for HPE MSA storage systems; they will negotiate down to the speed supported by the controller and backplane.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
