HPE
HPE P18436-B21 1.92 TB 2.5" SATA 600 3.1 DWPD 520 MB/s enterprise SSD
2.5-inch SATA mixed-use server SSD delivering 1.92 TB capacity, 520 MB/s reads and 3.1 DWPD endurance
- Endurance3.1 DWPD
- 92 TB capacity supports mixed workloads
- 1 DWPD endurance handles sustained write cycles
- 520 MB/s read speed accelerates data access
- SATA 600 interface fits existing server bays
- 5" hot-pluggable form factor enables live replacement
Enterprise SSD for mixed-use servers
The HPE P18436-B21 is a 1.92 TB 2.5-inch SATA solid-state drive built for mixed-use workloads in server environments. It supports hot-plug installation and carries an endurance rating of 3.1 DWPD for sustained write performance.
SATA 600 interface throughput limit
The drive connects through a SATA 600 interface, which caps the maximum read transfer rate at 520 MB/s. This bandwidth ceiling defines the practical speed limit for any workload running on this device.
3.1 DWPD endurance rating
The 3.1 drive-writes-per-day figure is the single specification that determines whether this SSD matches the write intensity of your application. Buyers who need higher write endurance for heavy logging or caching should verify this rating against their workload profile.
Najważniejsze cechy
- 92 TB capacity supports mixed workloads
- 1 DWPD endurance handles sustained write cycles
- 520 MB/s read speed accelerates data access
- SATA 600 interface fits existing server bays
- 5" hot-pluggable form factor enables live replacement
Specyfikacja
| Brand | HP |
|---|---|
| Endurance | 3.1 DWPD |
| Waga przesyłki | 0.45 kg |
| Wymiary opakowania | 224 × 188 × 140 mm |
Pytania dotyczące tego produktu
Is the 1.92 TB capacity the right choice for mixed-use server workloads?
Yes, the 1.92 TB model delivers 3.1 DWPD endurance, which is designed for mixed read and write workloads on supported server devices.
What does the 520 MB/s maximum read transfer rate mean once the drive is installed?
It represents the peak sequential read speed achievable over the SATA 600 interface under optimal conditions; sustained throughput will depend on the server controller and workload mix.
How does the SATA 600 interface cap real-world performance?
The SATA 600 link tops out at 6 Gb/s, so the 520 MB/s read rating sits near the practical ceiling of the bus; write speeds and random IOPS will be lower.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
