Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Silver 1U rack server front panel with drive bays and status lights

HPE

HPE ProLiant DL160 Gen10 rack server Xeon Silver 4110 32GB 2TB SATA

SKU CH-FW6M-0Y8AP

Compact 1U rack server with Xeon Silver 4110 8-core processor, 32GB DDR4 memory and 2TB SATA SSD storage

  • Rack Height1U
  • CPU TypeIntel Xeon
  • Installed Memory Size32GB
  • SSD (Installed)2TB
  • Raid LevelHP Smart Array S100i SR Gen10
  • Operating SystemNo
  • Compact 1U rack design fits tight remote-office spaces
  • Intel Xeon Silver 4110 8-core 2.1GHz up to 3.0GHz turbo powers workloads
  • 32GB DDR4 2666MHz memory handles multitasking smoothly
  • 2TB SATA SSD storage keeps data safe with software RAID
  • HP iLO 5 Standard enables remote server management

Compact 1U rack server for remote offices

The HPE ProLiant DL160 Gen10 is a 1U rack server built for remote office and small business roles. It runs on an Intel Xeon Silver 4110 8-core processor at 2.1GHz with 3.0GHz turbo. The system includes 32GB DDR4 memory at 2666MHz and two 1TB SATA SSDs for 2TB total storage. Management is handled through HP iLO 5 Standard with a single power supply.

Suits single-workload deployments.

This server fits organisations that need a space-saving platform for a single application or virtualisation host in a branch location. The dual 1Gb network ports and software RAID cover basic connectivity and data protection. Buyers who require redundant power supplies or hardware RAID with battery-backed cache should consider other configurations.

SATA SSD throughput limited to 6Gb/s interface

The installed solid-state drives connect through a 6Gb/s SATA link managed by the HP Smart Array S100i SR Gen10 controller. This interface sets the maximum sequential transfer rate for the storage subsystem. Workloads that demand higher sustained bandwidth will be constrained by this connection speed.

Najważniejsze cechy

  • Compact 1U rack design fits tight remote-office spaces
  • Intel Xeon Silver 4110 8-core 2.1GHz up to 3.0GHz turbo powers workloads
  • 32GB DDR4 2666MHz memory handles multitasking smoothly
  • 2TB SATA SSD storage keeps data safe with software RAID
  • HP iLO 5 Standard enables remote server management

Specyfikacja

SeriesProLiant DL160 G10
Rack Height1U
CPU TypeIntel Xeon
Installed Memory Size32GB
SSD (Installed)2TB
Raid LevelHP Smart Array S100i SR Gen10
Operating SystemNo
CPU ModelXeon Silver 4110

Pytania dotyczące tego produktu

What rack height and form factor does the 1U DL160 Gen10 server require for mounting?

The server occupies a single 1U rack space in a standard four-post cabinet and ships with fixed mounting rails for front installation.

Which steps are required to install the included memory and storage upgrades that ship separately?

Power down the server, open the chassis lid, insert the DDR4 DIMMs into the vacant memory slots, mount the two 1TB SATA SSDs into the front drive bays, then cable them to the Smart Array S100i controller.

What components are likely to need replacement during the server's service life?

The single power supply, cooling fans, the two 1TB SATA SSDs and the CMOS battery are the primary field-replaceable units that may require attention over time.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.