HPE
HPE R0Q54A 600 GB 2.5" SAS 12Gb/s 10000 RPM internal hard drive
A 600 GB 2.5-inch SAS 12Gb/s internal hard drive spinning at 10000 RPM for HPE MSA storage systems
- InterfaceSAS 12Gb/s
- Capacity600GB
- RPM10000 RPM
- 600 GB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfer rates
- 5 inch form factor fits dense server bays
- Designed for HPE MSA storage system compatibility
HPE 600 GB SAS 12Gb/s drive
The HPE R0Q54A is a 600 GB internal hard drive with a 2.5 inch form factor and a SAS 12Gb/s interface. It spins at 10000 RPM and is designed for HPE MSA storage systems. The drive suits environments that need consistent transactional throughput.
Sustained workload behaviour
At 10000 RPM the spindle delivers steady random I/O performance for database and virtualisation workloads. The SAS 12Gb/s link maintains bandwidth during extended write sequences without the throttling seen on slower interfaces. It is not suited for archival storage that favours capacity over speed.
Compatibility checks
Verify that your storage array accepts 2.5 inch SAS drives and supports the 12Gb/s signalling rate. Confirm the carrier or tray matches the HPE MSA form factor. Ensure the controller firmware lists this part number as supported.
Najważniejsze cechy
- 600 GB capacity stores large datasets
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfer rates
- 5 inch form factor fits dense server bays
- Designed for HPE MSA storage system compatibility
Specyfikacja
| Brand | HPE |
|---|---|
| Interface | SAS 12Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Waga przesyłki | 1.81 kg |
| Wymiary opakowania | 328 × 188 × 135 mm |
Pytania dotyczące tego produktu
How much heat does the 10000 RPM mechanism generate during continuous operation?
The 10000 RPM spindle speed means the drive produces noticeable heat under sustained load; adequate case airflow or a drive cage with cooling is recommended.
What controller or backplane is required to connect this 2.5 inch SAS 12Gb/s drive?
A SAS controller or storage backplane that supports 12Gb/s SAS signalling is needed; the drive uses a standard SAS connector.
Will this 600 GB SAS drive work in an older 6Gb/s SAS enclosure?
Yes, the 12Gb/s SAS interface negotiates down to 6Gb/s, so the drive operates in legacy SAS enclosures at the lower link speed.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
