Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black ABS case with rounded edges, pogo pins, three USB ports and one RJ45 jack

LORDWORLD

LORDWORLD Ethernet USB Hub Box for Raspberry Pi Zero Series with ETH/USB HUB HAT (B) Expansion Board

SKU CH-6GX5-TR719

An expansion case that adds three USB 2.0 ports and a 10/100 Mbit Ethernet port to a Raspberry Pi Zero via pogo pins

  • Designed for Raspberry Pi Zero series boards
  • Pogo pin connection fits Zero, Zero W and Zero WH directly
  • Three USB 2.0 ports expand peripheral options
  • RTL8152B chip adds 10/100M Ethernet via RJ45
  • Snap-fit ABS case with anti-fingerprint finish

Expansion for Raspberry Pi Zero

This LORDWORLD hub box adds wired networking and three USB 2.0 ports to any Raspberry Pi Zero series board. It targets makers who need Ethernet connectivity and extra peripherals for headless or embedded projects. The integrated RTL8152B chip handles 10/100M auto-negotiation for reliable local access. The pogo pin interface connects directly without soldering or cables.

Build integration and freedoms

The HAT (B) expansion board sits inside an ABS enclosure that snaps shut around the Zero, creating a single compact unit for tight spaces. Three downstream ports accept USB 2.0 or 1.1 devices such as keyboards, storage or sensors. Wired Ethernet removes dependence on Wi-Fi, freeing the single onboard USB port for other duties. The rounded case resists fingerprints and protects the board edges.

Upgrade path and limits

This kit replaces makeshift USB-Ethernet dongles and separate hubs that add bulk and cable strain. The jump is worth it when a project demands simultaneous wired networking and multiple USB peripherals in a small footprint. Builders who need Gigabit speeds or Power over Ethernet will need a different solution. The USB 2.0 bandwidth also limits high-throughput storage arrays.

Najważniejsze cechy

  • Designed for Raspberry Pi Zero series boards
  • Pogo pin connection fits Zero, Zero W and Zero WH directly
  • Three USB 2.0 ports expand peripheral options
  • RTL8152B chip adds 10/100M Ethernet via RJ45
  • Snap-fit ABS case with anti-fingerprint finish

Specyfikacja

BrandLORDWORLD

Pytania dotyczące tego produktu

Will the RTL8152B Ethernet chip limit sustained throughput to 100 Mbit/s?

Yes, the RTL8152B chip provides a single RJ45 port with 10/100M auto-negotiation, so sustained traffic is capped at 100 Mbit/s.

Does the enclosure or the RTL8152B chip run hot or draw enough power to need active cooling during all-day use?

The board uses a pogo-pin connection to the Pi Zero and has no fan; the RTL8152B is a low-power 10/100 Ethernet controller that typically stays cool in the ABS case.

Which Raspberry Pi Zero models must I already own for the pogo-pin connection to work?

The pogo-pin header fits Raspberry Pi Zero, Zero W and Zero WH boards that have the 40-pin GPIO populated.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.