Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Compact modular debugger with micro-B USB and flat cables

MCDODO

MCDODO STLINK-V3SET Modular Debugger Programmer for STM32/STM8

SKU CH-XPHY-5540V

Modular in-circuit debugger and programmer for STM32 and STM8 with USB 2.0 high-speed interface, JTAG, SWD, SWV and SWIM support plus virtual COM port up to 15 MHz

  • TypeSingle Board Computers
  • Modular debugger and programmer supports STM32 and STM8 targets
  • USB 2.0 high-speed interface enables fast in-circuit debugging and programming
  • Self-powered probe with direct firmware update via Micro-B connector
  • Multiple flat cables cover STDC14, MIPI10 and MIPI20 connectors
  • Virtual COM port up to 15 MHz on STDC14 debug connector

Modular Debugger for STM32 and STM8

The STLINK-V3SET is a standalone in-circuit debugger and programmer designed for STM32 and STM8 microcontrollers. It targets engineers and developers who need a self-powered probe with modular extension support for embedded development and evaluation tasks.

USB High-Speed Probe with Multiple Adapters

Installation connects via a USB 2.0 high-speed Micro-B interface that also handles direct firmware updates. The kit includes flat cables for STDC14, MIPI10, and MIPI20 connectors at a 1.27 mm pitch, plus an adapter board for SWIM headers at a 2.54 mm pitch. Mismatched connector pitch or voltage selection outside the 1.65 V to 5.5 V range are the typical integration issues.

Voltage Coverage from 1.65 V to 5.5 V

The probe supports target application voltages from 3 V to 3.6 V for JTAG, SWD, and VCP interfaces, with 5 V tolerant inputs. The SWIM adapter extends the lower bound to 1.65 V and the upper bound to 5.5 V. Virtual COM port operation reaches 15 MHz on the STDC14 connector. Targets requiring voltages outside these windows or interfaces not listed are not supported.

Najważniejsze cechy

  • Modular debugger and programmer supports STM32 and STM8 targets
  • USB 2.0 high-speed interface enables fast in-circuit debugging and programming
  • Self-powered probe with direct firmware update via Micro-B connector
  • Multiple flat cables cover STDC14, MIPI10 and MIPI20 connectors
  • Virtual COM port up to 15 MHz on STDC14 debug connector

Specyfikacja

TypeSingle Board Computers

Pytania dotyczące tego produktu

How do I verify the STLINK-V3SET is working after connecting it to my STM32 target?

The probe enumerates as a USB 2.0 high-speed device and exposes a Virtual COM port up to 15 MHz; successful JTAG or SWD connection and SWV trace confirm correct operation.

Which cables and adapters are included with the STLINK-V3SET and what must I source separately?

Flat cables for STDC14 to MIPI10, STDC14 and MIPI20 (1.27 mm pitch) are supplied; the MB1440 adapter board for SWIM (2.54 mm pitch) is not included.

Should I choose the STDC14 or MIPI10 debug connector for my STM32 board?

Use STDC14 when you need the Virtual COM port and SWV trace; MIPI10 (10-pin, 1.27 mm pitch) is smaller but lacks VCP.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.