Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Red and black braided PSU cable extension kit with 24-pin, CPU and GPU connectors and cable combs

myVolts

myVolts 30cm PSU Cable Extension Kit RedBlack 2xCPU 3xGPU 1x24-Pin 18AWG

SKU CH-5K06-H9V53

Sleeved 18AWG extension kit adds 30cm to one 24-pin, two CPU and three GPU cables with combs in RedBlack

  • TypeAT
  • Professional cable management with 15 included combs
  • Durable 18AWG UL 1015 tinned copper wiring
  • Complete kit: 24-pin, 2 CPU, 3 GPU extensions
  • Flexible high-density sleeving eases tight routing
  • 17 colour choices to match any build

Build-Ready Cable Kit

This 30 cm extension kit bundles one 24-pin ATX motherboard cable, two 4+4-pin EPS CPU cables and three 6+2-pin PCIe GPU cables. It targets builders who want a tidy, colour-co-ordinated loom without replacing the power supply itself. The high-density braided sleeve and included combs keep every run straight and secure. Seventeen colour choices let the loom match any theme.

18AWG UL 1015 Wire Gauge

Every conductor uses 18AWG UL 1015 tinned copper, the single spec that determines current capacity and heat resistance for extensions. Thicker strands reduce voltage drop across the 300 mm length while the insulation rating handles sustained load temperatures. If your build demands a different gauge or a longer reach, this kit will not meet that requirement.

Sustained-Load Behaviour

The tinned copper and UL 1015 jacket maintain stable resistance during prolonged high-current draws from modern GPUs and CPUs. Braided sleeving resists abrasion when cables are routed against sharp chassis edges over months of use. Cable combs prevent individual wires from shifting and creating hot-spots under continuous operation. The set arrives flat and is trained into curves during installation.

Najważniejsze cechy

  • Professional cable management with 15 included combs
  • Durable 18AWG UL 1015 tinned copper wiring
  • Complete kit: 24-pin, 2 CPU, 3 GPU extensions
  • Flexible high-density sleeving eases tight routing
  • 17 colour choices to match any build

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

How much extra reach does the 30 cm extension add to my existing PSU cables?

Each cable in the kit is 30 cm long, giving you an additional 300 mm of length from the PSU connector to the component socket.

What connectors does the kit use and what power delivery do they support?

The set includes one 24-pin ATX, two 4+4-pin EPS CPU and three 6+2-pin PCIe GPU extensions, all built with 18 AWG UL 1015 tinned copper wire for standard ATX power delivery.

What do I need to route and secure the braided cables inside my case?

The package supplies three 24-pin combs and fifteen 8-pin combs that clip onto the high-density braided sleeves for clean routing and alignment.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.