Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Enclosed metal power supply unit, low-profile 1U form factor, matte finish with terminal block and LED indicator

myVolts

myVolts LRS-150F-24 150W 24V 6.5A Power Supply

SKU CH-A688-S27T2

An enclosed 150 W switching supply delivering 24 V at 6.5 A with universal 85–264 VAC input and 90 % efficiency

  • TypeAT
  • Delivers 150 W continuous power at 24 V 6.5 A
  • Universal 85–264 VAC input handles global mains voltages
  • Certified to EN 62368-1, EN 60335-1 and EN 61558-1/-2-16
  • Free-air convection cooling with no-load draw below 0.5 W
  • Operates from -30 °C to 70 °C at up to 5000 m altitude

Industrial 24V 150W Power Supply

This 24 volt 150 watt enclosed switching supply delivers 6.5 amps for industrial automation, mechanical equipment and electronic instruments. It accepts a universal 85 to 264 volt AC input and operates from minus 30 to 70 degrees Celsius. The metal housing provides convection cooling without a fan. The unit measures 30 millimetres high in a 1U low-profile form factor.

Protections and Compliance

Built-in safeguards include short circuit, overload, over voltage and over temperature protection. The supply meets IEC and EN 60335-1, EN 61558-1 and 2-16 for household appliances, plus EN 62368-1 and UL 62368-1 for industrial equipment. An LED indicator shows power-on status and no-load consumption stays below 0.5 watts.

Installation Notes

Mount the unit in a control cabinet or enclosure with adequate airflow for convection cooling. Verify the AC input wiring matches local mains voltage before energising. The screw terminals accept standard ferrules or stripped wire for secure connections. Ensure the operating altitude does not exceed 5000 metres and vibration remains within the 5G test rating.

Najważniejsze cechy

  • Delivers 150 W continuous power at 24 V 6.5 A
  • Universal 85–264 VAC input handles global mains voltages
  • Certified to EN 62368-1, EN 60335-1 and EN 61558-1/-2-16
  • Free-air convection cooling with no-load draw below 0.5 W
  • Operates from -30 °C to 70 °C at up to 5000 m altitude

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

Will the internal fan need replacing after continuous 24/7 operation?

The LRS-150F-24 uses free-air convection cooling with no internal fan, so there is no fan to wear out or replace.

At what output current does the over-load protection engage on the 24 V rail?

The 24 V rail is rated for 6.5 A continuous; the built-in overload protection triggers above that level to protect the supply.

How hot does the metal enclosure get when the unit runs at full load all day?

The enclosure is designed to operate up to 70 °C ambient; at full 150 W load its 90 % efficiency keeps surface temperature within that limit.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.