SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00495018BTC
Dostępny
NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR4 2400 PC4-19200 CL17 ECC RDIMM Dell PowerEdge FC430 memory upgrade
128GB DDR4 2400 ECC RDIMM kit with eight 16GB modules at CL17 for Dell PowerEdge FC430 servers
- Capacity128GB (8 x 16GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity from eight 16 GB modules
- DDR4 2400 speed rated at PC4-19200 bandwidth
- ECC registered design detects and corrects data errors
- CL17 CAS latency at 1.2 V operating voltage
- Validated for Dell PowerEdge FC430 server compatibility
Dell PowerEdge FC430 memory kit
This 128GB kit contains eight 16GB DDR4 registered DIMMs built for the Dell PowerEdge FC430 server. ECC and register circuitry protect data integrity in mission-critical workloads. Modules run at 1.20V and use a 288-pin RDIMM form factor. IT teams seeking validated compatibility for this platform can install the kit with confidence.
Capacity and headroom
Eight 16GB modules deliver 128GB total, giving virtualisation hosts and database engines ample room for concurrent guests and large buffer pools. DDR4-2400 at CL17 supplies 19200 MB/s per module, so memory bandwidth scales with the full population. The 1Rx4 organisation keeps electrical loading low, but the FC430 memory ceiling stops further expansion beyond this kit.
Thermals and power
Bare modules without heat spreaders rely on the server’s directed airflow for cooling. Each DIMM draws 1.20V, keeping per-module power modest even under sustained load. Registered buffering adds negligible latency while reducing signal stress on the memory controller. In a properly ventilated chassis the kit runs quietly within standard thermal limits.
Najważniejsze cechy
- 128 GB total capacity from eight 16 GB modules
- DDR4 2400 speed rated at PC4-19200 bandwidth
- ECC registered design detects and corrects data errors
- CL17 CAS latency at 1.2 V operating voltage
- Validated for Dell PowerEdge FC430 server compatibility
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-614K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT |
Pytania dotyczące tego produktu
Will the 2400 MHz DDR4 ECC RDIMM modules run reliably alongside any existing 2666 MHz sticks in my PowerEdge FC430?
The kit is validated at DDR4 2400 (PC4-19200) CL17 1.20 V; when mixed with faster modules the system will down-clock all channels to 2400 MHz, preserving ECC and registered operation.
How can I verify the 8 x 16 GB 1Rx4 registered DIMMs are detected and ECC is active after installation?
Enter the system BIOS or iDRAC and confirm 128 GB total, 2400 MT/s speed, registered mode and ECC enabled for all eight 288-pin slots.
Does the package include only the eight 16 GB RDIMMs or are any tools, heat spreaders or cables supplied?
The box contains the 128 GB (8 x 16 GB) DDR4 2400 CL17 1.20 V ECC RDIMM kit; no heat spreaders, tools or cables are included.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
