Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 ECC RDIMM for THINKMATE STX-TN-XE12-22S3 NAS memory upgrade

SKU CH-VMBD-X2PJG

128GB DDR4 3200 ECC registered kit with eight 16GB modules at CL22 and 1.2V for Thinkmate NAS

  • Capacity128GB (8 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB kit with eight 16 GB modules for high capacity
  • DDR4 3200 speed at 1.2 V for efficient data throughput
  • ECC registered design corrects errors to protect data integrity
  • 2Rx8 dual-rank organisation optimises bandwidth on compatible boards
  • Validated for Thinkmate STX-TN-XE12-22S3 NAS compatibility

Compatible THINKMATE NAS Upgrade

This 128GB kit contains eight 16GB DDR4 RDIMM modules built for the THINKMATE STX-TN-XE12-22S3 NAS. ECC and registered operation protect data integrity in always-on storage workloads. The kit targets administrators who need maximum supported capacity for virtualisation or large file datasets. Systems requiring unbuffered memory or consumer platforms cannot use these modules.

Low-Voltage Registered Operation

Each module runs at 1.2V with a CL22 latency profile at 3200 MT/s. Registered buffering reduces electrical load on the memory controller, helping maintain stable thermals in densely populated NAS chassis. No heat spreaders are fitted, so airflow across the DIMM slots handles cooling. Power draw stays modest thanks to the standard DDR4 voltage.

Sustained Load Stability

All sticks are stress tested under load before shipping to verify reliability during extended RAID rebuilds, backup windows or container workloads. The 2Rx8 organisation keeps signal integrity consistent across all eight slots when the system runs at full population. Error-correcting code continues to detect and correct single-bit faults throughout long uptime periods.

Najważniejsze cechy

  • 128 GB kit with eight 16 GB modules for high capacity
  • DDR4 3200 speed at 1.2 V for efficient data throughput
  • ECC registered design corrects errors to protect data integrity
  • 2Rx8 dual-rank organisation optimises bandwidth on compatible boards
  • Validated for Thinkmate STX-TN-XE12-22S3 NAS compatibility

Specyfikacja

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K8
Capacity128GB (8 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Pytania dotyczące tego produktu

How do I install the 288-pin DDR4 RDIMM modules in the THINKMATE STX-TN-XE12-22S3 NAS and what step is commonly missed?

Power down the NAS, open the chassis, align the notch on each 288-pin module with the slot key, press firmly until both retaining clips click, then verify all eight 16 GB modules are recognised in the BIOS before closing the case.

What maintenance or replacement will the ECC registered RDIMM kit need over its service life?

The modules have no moving parts and no heat spreaders; apart from occasional dust removal from the gold contacts and ensuring the 1.20 V power supply remains stable, no scheduled maintenance or component replacement is required.

What is the first limit that appears when the 128 GB kit runs sustained workloads at 3200 MT/s?

The registered ECC design and CL22 latency optimise stability over raw throughput, so the memory controller’s maximum supported rank count or total capacity is typically reached before bandwidth or thermal limits become an issue.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.