Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800MHz CL40 1.1V ECC RDIMM Kit for GIGABYTE MZ33-AR1

SKU CH-VTXY-YGJ2X

128 GB DDR5-4800 ECC registered RDIMM kit, eight 16 GB modules at 1.1 V CL40, validated for the GIGABYTE MZ33-AR1 motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Pokaż jeszcze 18 konfiguracji
  • 128GB total capacity from eight 16GB modules for maximum server memory density
  • DDR5 4800MHz speed with CL40 latency matches motherboard rated specifications exactly
  • ECC Registered RDIMM architecture corrects single-bit errors and buffers signals for stability
  • 1V operating voltage meets DDR5 standard for efficient server power consumption
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with GIGABYTE MZ33-AR1

Exact-match server memory kit

This NEMIX RAM kit delivers 128GB of DDR5 ECC registered memory in eight 16GB modules. It is built for the GIGABYTE MZ33-AR1 motherboard and matches the board's required 288-pin RDIMM form factor. System administrators upgrading compatible servers receive the precise rank, voltage and timing the memory controller expects.

Thermals and power in normal use

Each module operates at 1.1V without a heat spreader, relying on the server chassis airflow for cooling. The registered architecture reduces electrical load on the memory controller when all slots are populated. Power draw scales with the fully populated configuration at the rated DDR5 4800 speed.

What the kit changes

The eight-module kit fills the supported slots to reach the full 128GB capacity with ECC protection active across every rank. Registered buffering allows stable operation at full population where unbuffered memory would not. No additional software or accessories are included beyond the memory modules themselves.

Najważniejsze cechy

  • 128GB total capacity from eight 16GB modules for maximum server memory density
  • DDR5 4800MHz speed with CL40 latency matches motherboard rated specifications exactly
  • ECC Registered RDIMM architecture corrects single-bit errors and buffers signals for stability
  • 1V operating voltage meets DDR5 standard for efficient server power consumption
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with GIGABYTE MZ33-AR1

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I install the 8x16GB DDR5 RDIMM kit on the GIGABYTE MZ33-AR1, and what step is often missed?

Power off the server, open the chassis, and seat each 288-pin module in the exact slot order shown in the motherboard manual; the step most often missed is following the prescribed population sequence so all 128GB are recognised at 4800MHz.

What maintenance or replacement will the ECC RDIMM kit need later?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement is only needed if a DIMM fails, at which point the lifetime replacement warranty covers a swap.

What limit appears first when the 1Rx8 Registered ECC kit runs sustained workloads at 1.1V?

The registered buffer and ECC logic keep signal integrity stable, so the first practical limit is the motherboard's maximum supported capacity and slot population rules, not the memory's own thermal or electrical ceiling.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.