BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279117BTC
Dostępny
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5415IR memory upgrade
16 GB DDR3 SODIMM kit in two 8 GB modules at 1333 MHz for POSIFLEX XT-5415IR terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 16 GB kit boosts POS terminal capacity
- DDR3 1333 MHz CL9 matches system spec
- 35 V low-voltage modules cut power draw
- 204-pin SODIMM fits POSIFLEX XT-5415IR slot
- Dual-rank 2Rx8 Samsung Micron Hynix chips ensure stability
POSIFLEX XT-5415IR memory upgrade
This 16GB kit contains two 8GB DDR3 1333 SODIMM modules built for the POSIFLEX XT-5415IR JIVA high-end IR touch fanless POS terminal. It suits retailers, hospitality operators and system integrators who need reliable memory for point-of-sale workloads. The non-ECC unbuffered design matches the terminal's original specification.
Tool-free SODIMM installation
The 204-pin modules slot into the terminal's memory compartment after removing the access panel; no special tools are required. Handle the modules by the edges to avoid static damage and ensure each stick clicks fully into place. The low-profile design fits the fanless chassis without clearance issues. Common mistakes include inserting a module at an angle or leaving one side unlatched, which causes a no-post condition.
Verify terminal model and slot count
Confirm the unit is a POSIFLEX XT-5415IR JIVA before ordering, as other POSIFLEX models may use different memory configurations. Check that both SODIMM slots are free or that you are replacing an existing pair, because the kit provides two modules. The terminal must support DDR3 1333 at 1.35V operation; consult the service manual for the approved voltage setting.
Najważniejsze cechy
- 16 GB kit boosts POS terminal capacity
- DDR3 1333 MHz CL9 matches system spec
- 35 V low-voltage modules cut power draw
- 204-pin SODIMM fits POSIFLEX XT-5415IR slot
- Dual-rank 2Rx8 Samsung Micron Hynix chips ensure stability
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Pytania dotyczące tego produktu
How can I confirm the POSIFLEX XT-5415IR recognises the full 16 GB kit after installation?
Enter the BIOS or UEFI on the POSIFLEX XT-5415IR and check that the memory total shows 16 GB running at DDR3 1333 with CL9 timings.
What is included in the package and what extra parts are required for the upgrade?
The box contains two 8 GB 204-pin DDR3 SODIMM modules (2Rx8, 1.35 V, non-ECC, unbuffered). No additional components are needed.
Which capacity and speed version should I select for the POSIFLEX XT-5415IR terminal?
Choose the 16 GB (2 × 8 GB) DDR3 1333 PC3-10600 kit; it matches the terminal's supported memory specification exactly.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281714BTC
Dostępny
