BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276682BTC
Dostępny
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM POSIFLEX XT-3815-G2 JIVA memory upgrade
16GB DDR4 SODIMM kit at 2666MHz CL19 built for POSIFLEX XT-3815-G2 JIVA terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit for faster multitasking on POSIFLEX XT-3815-G2
- DDR4 2666 speed matches system bus for stable throughput
- CL19 latency keeps response tight in transaction workloads
- 2 V modules run cool inside compact kiosk chassis
- 260-pin SODIMM form factor drops straight into factory slots
POSIFLEX XT-3815-G2 JIVA DDR4 SODIMM kit
This 16 GB kit uses two 8 GB DDR4 2666 modules built for the POSIFLEX XT-3815-G2 JIVA foldable terminal. Each stick is a 260-pin unbuffered non-ECC SODIMM running at 1.20 V with CL19 timing. It targets technicians upgrading that specific point-of-sale platform.
16 GB dual-channel capacity and CL19 headroom
Two ranks per module (2Rx8) give the memory controller full dual-channel bandwidth at 2666 MT/s. The 16 GB total handles typical POS workloads and multi-tab browsers comfortably. Heavier virtualization or large local databases will exhaust the 16 GB ceiling and the fixed CL19 latency.
Drops into the terminal SODIMM slots
The low-profile sticks need no extra clearance and draw standard 1.20 V DDR4 power. No heat spreader means they fit the tight chassis of the XT-3815-G2 JIVA without modification. Builders needing ECC, registered DIMMs or speeds above 2666 must choose a different platform.
Najważniejsze cechy
- 16 GB kit for faster multitasking on POSIFLEX XT-3815-G2
- DDR4 2666 speed matches system bus for stable throughput
- CL19 latency keeps response tight in transaction workloads
- 2 V modules run cool inside compact kiosk chassis
- 260-pin SODIMM form factor drops straight into factory slots
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Pytania dotyczące tego produktu
Will the 2666MHz DDR4 SODIMM work alongside the memory currently installed in my POSIFLEX XT-3815-G2 JIVA terminal?
The kit is built to POSIFLEX POS specifications at DDR4 2666 (PC4-21300) with 2Rx8 organisation and 1.20V operation; matching those parameters with the existing modules gives the best chance of stable dual-channel operation.
How can I confirm the 16GB kit is running at CL19 2666MHz after installation?
Check the memory speed and CAS latency reported in the system BIOS or a utility such as CPU-Z; both should show 2666MHz and CL19 for each 8GB module.
What comes in the box and is anything else required for the upgrade?
The package contains the 16GB (2x8GB) DDR4 2666MHz CL19 260-pin SODIMM kit only; no tools, heat spreaders or additional cables are included or needed for installation.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279256BTC
Dostępny
