BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0028093BTC
Dostępny
NEMIX RAM
NEMIX RAM 16GB DDR4 2666MHz CL19 2Rx8 1.2V 260-Pin SODIMM QNAP memory upgrade
16 GB DDR4 SODIMM running at 2666 MHz with CL19 latency for QNAP systems
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Boosts QNAP NAS performance with 16GB DDR4 2666MHz memory
- Low 1.2V voltage reduces power draw and heat output
- CL19 latency timing supports responsive multitasking
- 2Rx8 dual-rank design increases memory density per slot
- 260-pin SODIMM form factor fits compatible QNAP laptop-style sockets
QNAP SODIMM upgrade
This 16 GB DDR4 SODIMM is built for QNAP systems that accept PC4-21300 memory. It targets owners who need a single-module capacity increase without mixing ranks. The 260-pin form factor fits compatible laptop-style slots in supported NAS units.
Sustained workload behaviour
CL19 timing and 1.2 V operation keep latency steady during long file transfers or virtualisation tasks. Dual-rank 2Rx8 organisation helps maintain throughput when multiple VMs or containers access memory simultaneously. Major-brand DRAM from Samsung, Micron or Hynix provides consistent output under continuous load.
Installation notes
Insert the module at an angle until the clips engage; no tools or firmware flashing are required. The lack of a heat spreader eases clearance in tight drive bays. Builders who need ECC protection or registered buffering cannot use this unbuffered non-ECC stick.
Najważniejsze cechy
- Boosts QNAP NAS performance with 16GB DDR4 2666MHz memory
- Low 1.2V voltage reduces power draw and heat output
- CL19 latency timing supports responsive multitasking
- 2Rx8 dual-rank design increases memory density per slot
- 260-pin SODIMM form factor fits compatible QNAP laptop-style sockets
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1 x 16GB) DDR4 2666MHz PC4-21300 2Rx8 1.2V 260-PIN Non-ECC SODIMM |
Pytania dotyczące tego produktu
How much power does the 1.2V DDR4 2666MHz SODIMM draw when the QNAP NAS runs continuously?
The module operates at the standard DDR4 voltage of 1.2V; actual power draw varies with the NAS workload and memory controller but stays within the DDR4 low-voltage envelope.
What must the QNAP NAS already provide for this 260-pin SODIMM to function?
The NAS needs a free 260-pin DDR4 SODIMM slot that accepts non-ECC unbuffered modules at 2666MHz (PC4-21300).
Will this CL19 2Rx8 module work alongside older DDR4 sticks already installed in the QNAP?
Yes, provided the existing memory is also DDR4 non-ECC unbuffered SODIMM; the system will run all modules at the lowest common speed and latency.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00283543BTC
Dostępny
