NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 Supermicro H12SSW-NT EPYC memory upgrade
16 GB DDR4 3200 ECC registered RDIMM, 2Rx8 CL22 at 1.2 V, validated for Supermicro H12SSW-NT EPYC platforms
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 3200 capacity speeds up server workloads
- ECC registered design protects data integrity in mission-critical systems
- 2Rx8 dual-rank organisation boosts memory throughput
- 2V low voltage reduces power draw and heat
- Supermicro H12SSW-NT validated compatibility ensures stable operation
NEMIX RAM 16GB DDR4 3200 ECC RDIMM
This 16GB DDR4 3200 module is built for Supermicro H12SSW-NT motherboards running AMD EPYC processors. It targets system administrators and integrators who need registered ECC memory for stable server operation. The single stick format suits incremental capacity increases.
Registered ECC with 2Rx8 organisation
The module operates as a 288-pin RDIMM at 1.2V with CL22 latency and a 2Rx8 rank layout. Registered buffering and on-die ECC protect data integrity under sustained load, which is the decisive factor for compatibility with the target platform. Unbuffered or non-ECC alternatives will not function in this system.
Straightforward DIMM installation
Installation follows standard server DIMM procedure: power down, open the chassis, align the keyed 288-pin edge connector, and press until the ejector tabs lock. The most common issue is mixing registered and unbuffered modules or populating slots in an order the motherboard firmware does not support, so consult the board manual for the approved population sequence.
Najważniejsze cechy
- 16GB DDR4 3200 capacity speeds up server workloads
- ECC registered design protects data integrity in mission-critical systems
- 2Rx8 dual-rank organisation boosts memory throughput
- 2V low voltage reduces power draw and heat
- Supermicro H12SSW-NT validated compatibility ensures stable operation
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Pytania dotyczące tego produktu
What does the 3200 MT/s rating mean once the module is installed in a Supermicro H12SSW-NT system?
The module runs at DDR4 3200 with CL22 latency, delivering PC4-25600 bandwidth when the EPYC memory controller trains it at that speed.
How does the registered ECC interface affect what the memory controller can do?
The 2Rx8 registered DIMM presents a buffered load to the EPYC controller, enabling ECC error correction and allowing higher total capacity per channel.
What physical slot and keying does the 288-pin RDIMM require?
It fits a standard DDR4 288-pin RDIMM socket; the registered key notch prevents insertion into UDIMM or SODIMM slots.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



