BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277188BTC
Dostępny
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX RT-6015
32 GB DDR4 2400 CL17 SODIMM kit (2 × 16 GB, 1.2 V, 260-pin, non-ECC) built for the POSIFLEX RT-6015 terminal
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands terminal memory for smoother multitasking
- DDR4 2400 speed matches POSIFLEX RT-6015 specification
- CL17 latency and 1.2 V operation keep power draw low
- 260-pin SODIMM form factor fits the terminal slot exactly
- Built with major OEM chips and stress tested for reliability
32GB DDR4 SODIMM kit for POSIFLEX RT-6015
This kit supplies 32GB of DDR4 2400 memory in two 16GB modules built for the POSIFLEX RT-6015 terminal. It uses unbuffered non-ECC SODIMMs that install directly into the system's memory slots. The kit targets retailers and service technicians who need a validated upgrade for this specific point-of-sale platform.
Check slot count and current configuration
The RT-6015 must accept 260-pin DDR4 SODIMMs running at 1.2V with CL17 timing. Verify how many slots the board exposes and whether existing modules occupy them, because this kit fills two slots with 2Rx8 ranks. Confirm the BIOS recognises PC4-19200 speed before ordering.
Two matched modules simplify the upgrade
The package contains a paired 2x16GB set tested together for the POSIFLEX POS series, so you avoid mixing loose sticks that can cause instability. No heat spreaders are included, keeping the low-profile form factor required by the slim terminal chassis. The modules arrive ready to install without extra cables or software.
Najważniejsze cechy
- 32 GB kit expands terminal memory for smoother multitasking
- DDR4 2400 speed matches POSIFLEX RT-6015 specification
- CL17 latency and 1.2 V operation keep power draw low
- 260-pin SODIMM form factor fits the terminal slot exactly
- Built with major OEM chips and stress tested for reliability
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Pytania dotyczące tego produktu
Does the kit contain both 16 GB modules or must a second stick be purchased separately?
The package includes two 16 GB DDR4 SODIMM modules for a total of 32 GB; no additional memory sticks are required.
Why choose the 32 GB 2400 MHz CL17 kit instead of a lower-capacity option?
The 32 GB (2×16 GB) configuration matches the POSIFLEX RT-6015's dual-channel design and delivers the full 2400 MT/s speed at CL17 latency.
What does the 2400 MHz rating mean once the modules are installed in the RT-6015?
The system will run the memory at 2400 MT/s (PC4-19200) with CL17 timings at 1.20 V, providing the rated bandwidth for the terminal.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279767BTC
Dostępny
